PCB Piezotronics Model 480E09 ICP Sensor Signal Conditioner Calibrated +Manual
$499.94

The PCB Piezotronics Model 480E09 ICP Sensor Signal Conditioner is a high-quality industrial automation and motion control component designed to enhance the performance of sensors in a variety of applications. With its reliable brand reputation and specific model number, it is easy to identify and select the correct signal conditioner for your particular needs. This product ensures accurate and reliable sensor data transmission, making it a valuable asset for industrial automation systems.The PCB Piezotronics Model 480E09 is a portable, single-channel signal conditioner designed specifically to power and process signals from ICP (Integrated Circuit Piezoelectric) sensors like accelerometers or pressure transducers. Key Features and Capabilities
Adjustable Gain: Unlike simpler models, the 480E09 features a 3-position rotary switch for x1, x10, and x100 gain, allowing you to amplify weak signals for better measurement accuracy.
Dual Power Options: It is primarily battery-powered by three 9V alkaline batteries (providing roughly 50 hours of life), but it also supports an external 18–30 VDC power source for long-term lab use.
Built-in Diagnostics: The front panel includes an analog meter with color-coded zones:
Green: Normal operation.
Yellow: Low battery.
Red: Sensor fault, such as an electrical short.
Standard Connections: It uses universal BNC connectors for both sensor input and signal output to oscilloscopes or DAQ systems. Technical Specifications
Frequency Range: 0.15 to 100,000 Hz (at x1 and x10 gain).
Excitation Current: Provides a regulated constant current of approximately 2.0 to 3.2 mA to the sensor.
Output Limits: Capable of a voltage swing from +14V to -8V when using a 27V supply, which helps prevent signal clipping during high-intensity measurements.
Portability: Extremely compact and lightweight at roughly 0.7 lbs (0.3 kg), making it a standard choice for field testing.
Unit was calibrated and has the certificate of calibration. In compliance with ISO 10012-1 and former MIL-STD-45662A and is traceable to NIST. Comes with installation and operating manual.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.