INTBUYING® · PB-10D Technical Specification INTBUYING® Small Desktop Automatic Travelling Steel Plate Milling Machine Beveller Chambering Machine 220V 3-Phase Product Overview
The steel plate beveling machine is a welding and cutting auxiliary device for various welding manufacturing industries, such as shipbuilding, metallurgy and steel structures. Compared with other beveling methods, it has the advantages of high efficiency, energy saving, environmental protection, simple operation and convenient use. It is especially suitable for stainless steel difficult to process and high-strength steel materials, can greatly reduce the workload of workers, saves labor costs and conforms to the current environmental protection trends and ideas of low carbon and low energy consumption.
Note: The machine is suitable for processing iron, cast iron, aluminum, stainless steel, alloy steel and other metal materials except for materials containing magnesium. Product Parameters ModelPB-10D Motor power2.2KW Motor voltage380V 3-Phase (There is a 3-phase transformer in the packing list, and it can convert the 220V 3-phase power into the 380V 3-phase power for the beveller.) Motor speed2880rpm Beveling speed0-1.5m/min (0-59in/min) Beveling angle30-60 degrees, freely adjustable Beveling width1-18mm (0.04-0.7 inch) Minimum steel plate width30mm (1.2in) Machine size51*58*72cm (20.1*22.8*28.3 inches) Net weight of machine77kg (169.7Lbs) Precaution
- All electrical or electronic repairs or adjustments must be carried out by trained professional electrical personnel.
- The power switch must be cut off before dismantling or replacing the electric appliance.
- The tool should be made of insulating materials.
- Prohibit placing other articles on the electric box or the operating panel.
- Before the power is switched on, it must be confirmed that no one else does the work on the machine.
- Never touch the switch or electrical component with a wet hand.
- Do not use the machine outdoors when it is wet. Otherwise it will cause the machine to break down and cause damage, leading to serious casualties.
- In the process of operation, be sure to wear protective equipment (goggles, safety shoes, etc.) and so on.
Features & Advantages
1. The feed torque is further enhanced, and the machining performance is more stable.
2. The beveling angle processed by the machine can be adjusted arbitrarily between 30° and 60°.
3. Operation is simple and easy to learn, and ordinary workers can operate multiple units.
4. The maximum bevel width can be 18mm, and the beveling effect is better.
5. The milling processing method ensures the bevel surface is smooth, and the stainless steel bevels can be directly welded without pickling.
6. The machine is suitable for processing small and medium-sized plates, and is low in material consumption.
7. The cold machining mode is free of smoke and sparks, the characteristic of the processed material cannot be changed, and the welding flaw detection quality can be ensured.
Control Box
The control box integrates the speed regulator, the power switch and the feed switch, effectively achieving precision control over the start, stop, feed and speed, and well adapting to different processing requirements of various materials.
Feed Depth Adjusting Handle
The handle is designed for adjusting the feed depth freely to form different bevel sizes as needed. Adjustment is easy and convenient, the adaptation is higher, and the handle meets the ergonomic standards and is user-friendly.
Angle Ruler
The beveling angle can be freely adjusted within the range of 30-60 degrees according to the processing demands, the adjustment can be easily achieved through the lock nuts, and the scale marks of the angle ruler are accurate and clear.
Feed Mechanism
The high-quality feed motor is adopted to drive the feed mechanism to operate during beveling, the beveling operation is stable and reliable, the beveling quality can be greatly improved, and the feed process is smooth and successful.
Cutter
The high-performance beveling cutter is equipped with multiple blades, the blades are high in quality, low in cost and easy to replace and maintain, the bevel forming effect can be well guaranteed, and the practicability is higher.
Transformer
The high-quality transformer is provided for the customer, and can convert the 220V 3-phase power into the 380V 3-phase power for the machine, facilitating efficient operation of the machine and saving time and labor.
Operation Method
1. Loosen the screw of the press wheel, place the workpiece approximately 5mm away from the cutting edge, then press it tightly and tighten the screw.
2. Loosen the bolts of the angle ruler, adjust it to the specified angle, and then lock it securely.
3. Turn on the power switch and activate the auto-feed button to make the workpiece advance. Tool setting is completed once the blade touches the workpiece. Perform sequential beveling by adjusting the feed depth and height until the specified beveling requirements are met. (During cutting, the speed should not be too fast. Monitor the wear of the blade and replace it promptly.)
Item Included (057093):1 x Desktop Automatic Travelling Steel Plate Milling Machine 220V
You can make order with no worry.
Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
On Feb 23, 2026 at 22:45:00 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.