Product highlights
works with amplified and non-amplified systems (including Bose audio systems)provides Vehicle Speed Sensor (VSS), parking brake, and reverse connections for installing a navigation receiverretains factory Bluetooth if equippedretains factory OnStar if equippedretains factory steering wheel audio controls (allows dual function for each button)retains Rear Seat Controlswarranty: 1 yearWhat\'s in the box
- Radio replacement/SWC interface module (for GM LAN 29-bit databus)
- Chime module
- (CMX)
- 44-Pin harness (OS-GMLAN44)
- Radio harness (RP5-RADPWRAUDIO)
- Steering wheel control harness (4-pin connector to 3.5mm/blue wire)
- Backup camera harness
- Antenna adapter
- Instructions
About this item
Written by Crutchfield\'s Bob Bihlmayer
Keep your factory features
PAC\'s RadioPRO5 RP5-GM32 wiring interface enables you to install a new car stereo and retain useful factory functions in your 2012-20 GM truck or SUV with factorynavigation. You can upgrade to the higher sound quality of an aftermarket receiver while maintaining your factory-installed OnStar®, factory amplifier, Bluetooth®, safety warning chimes, Retained Accessory Power (RAP), and rear seat controls. If you\'re installing a navigation receiver, this interface also features the Vehicle Speed Sensor (VSS), parking brake, and reverse connections you need.
Control your new radio
The RadioPRO5 interface retains your factory steering wheel audio controls with your new stereo. The interface comes pre-programmed with the factory control functions, or you can reassign the functions of your factory buttons, or even assign two functions to each of your factory buttons.
Installation note: This interface will not retain the fader controls on vehicles with the factory premium Bose® audio system.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.