|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
PAC RP4-AD11 2004-15 Select Audi models, SWC
$134.99

Product highlights install an aftermarket receiver in select 2004-15 Audi vehiclesworks with amplified and non-amplified systemsretains your steering wheel audio controls and factory amplifier and sub (does not retain fader)supports RAP (Retained Accessory Power); provides a 12-volt switched accessory outputsupplies VSS (Vehicle Speed Sensor), illumination, reverse trigger, and parking brake outputs for navigation receiverswarranty: 1 yearWhat\'s in the box - Radio replacement module (for Audi)
- Wiring harness (RP4-AUDI11-HAR-A)
- Wiring harness (RP-AUDI11-HAR-B)
- SWC harness
- Instructions
About this item Written by Crutchfield\'s Bob Bihlmayer PAC RP4-AD11 PAC\'s RP4-AD11 wiring interface lets you replace the factory radio in select 2004-13Audi vehicleswith or without factory amplified systems. You\'ll retain your factory steering wheel audio controls and the use of your factory amplifier and subwoofer (if present). The interface also supplies the databus-driven output you\'ll need to keep your retained accessory power (RAP), as well as the outputs you\'ll need to install a navigation receiver. Important Note: When you install a new car stereo, you\'ll lose the ability to fade from front to rear if you have the Bose or Symphony audio system.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|