|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Original BCC6A MK2 12V 6A Generator Intelligent Battery Charger Module PEMP
$72.00

Original BCC6A MK2 12V 6A Generator Intelligent Battery Charger Module PEMP This charger is designed for lead-acid batteries used in engines. It adopts a three-stage intelligent control method of constant current fast charging, constant voltage equalization charging, and trickle floating charging. It can charge for a long time without damaging the battery, and can maintain the full charge of the battery while ensuring the service life of the battery. This charger can be used in parallel with the engine charging generator, and the charger does not need to be disconnected during engine operation. 2. Performance and characteristics The main features are as follows: Aluminum heat dissipation is adopted, with good heat dissipation effect and strong anti-interference ability; Advanced switching power supply structure is adopted, with a wide AC input voltage range; Three-stage intelligent charging, automatically maintaining the battery power; With short circuit and anti-reverse connection protection functions; With charging voltage and fine-tuning functions; With LED status indication; 3. Parameter display The charger adopts a three-stage intelligent control method according to the characteristics of lead-acid batteries. The first stage charging mode is the \"constant current mode\". When the battery voltage is lower than the preset value, it is the constant current charging stage; the charging current is the rated current 6A (3A). The high current charging makes the battery power rise rapidly. The rising process is the fast charging state, and the red charging indicator light is always on. The second stage charging mode is the \"constant voltage mode\". When the battery voltage rises quickly above the preset value after constant current mode charging, the charging current decreases with the increase of battery voltage. At this time, the charger maintains constant voltage output, the charging current slowly decreases, and the terminal voltage of the battery slowly stabilizes at the equalization charging voltage value. During this process, the red charging indicator light is always on. When the equalization charging state is reached, the internal timer starts timing, and the charging current drops below 0.8A (0.4A) or about 3.5 hours later, it switches to the floating charging mode; The charger enters the equalization charging state: when the charging current is greater than 0.8A (0.4A) and less than 5.2A (2.6A). The third stage charging mode is \"floating mode\". After the battery is charged in two modes, the battery is basically fully charged. The charger output voltage automatically switches to the floating charge voltage of 27V (13.5V), and the charging current drops to 0.8A (0.4A). The red charging indicator light turns off. The floating charge mode charging current can offset the self-discharge of the battery and keep the battery in a fully charged state without disconnecting the charger, which has no effect on the battery life. IV. Parameter Specifications

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|