* Model 7972-0CB20-OXAO is an opto-isolated adapter designed for the entire for Siemens for S7-300/400 and for S7-200 for PLC series. Its USB and RS485 ports are equipped with for surge and protection circuits, making it for ideal for industrial communication environments prone; various circuit protection measures safe system operation.
* Opto-isolator: This device is also known as an optocoupler (or photocoupler). Optocouplers use light as a medium to transmit electrical signals, effectively achieving electrical isolation between input and output signals. Key advantages include: unidirectional signal transmission, electrical isolation between input and output, no from the output to the input, strong immunity, and stable operation.
* Characteristics and Technical Specifications: Supports software versions STEP7 V5.2 (and later) and STEP7 for Micro/Win 4.0 (and later). for MPI baud rates supported: 19.2 Kbps and 187.5 Kbps; for PPI baud rates supported: 9.6 Kbps, 19.2 Kbps, and 187.5 Kbps. The for MPI port automatically adapts to communication speeds of 19.2 Kbps, 187.5 Kbps, 500 Kbps, and 1.5 Mbps ( for DP master communication).
* Operating Temperature: -20 to +75°C; supports long-distance communication up to 1,000 meters (on the RS485 side at a baud rate of 187.5 Kbps). Name: Optically Isolated Adapter
Model: Compatible with 0CB20 (6ES7972-0CB20-0XA0)
Cable Length Size: Approx. 5 meters
Material: Industrial-grade flame-retardant PC+ABS alloy plastic
Color: As shown
Interface: USB to 9-pin male connector
System Compatibility: Fully supports for XP, Win7, and for Vista
Applications: Supports for PPI/ for MPI and for DP for multi-master communication; suitable for Siemens for S7-200/300/400 series PLCs and for Siemens HMIs/touch panels (e.g., TP170/177/270, OP25/35/77, MP177/270/277B, etc.)
Isolation Advantages: Features full-signal photoelectric isolation for high stability; supports for S7-300 online monitoring and data transmission. Designed for industrial environments; since equipment such as variable for frequency drives ( for VFDs) and modules often generate during startup and shutdown—which can data transmission—using an isolated adapter is essential.
Driver for Information: When using for Siemens for S7-300 programming software (Version V5.5), no driver installation or virtual COM port generation is required; simply select the USB interface directly. Regardless of whether you are communicating with an for S7-200, for S7-300, or for S7-400 for PLC, please for ensure the for Siemens for S7-300 programming software is installed first.
Package Contents:
1 for x Optically Isolated real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the onlyship to confirmed Order addresses.Please comfirm that your Order address is in line with your shipping address.
Please kindly note thatthe combined shippingis not providedbecause the shipping fee is calculated by weight. Also, the each additional item meansexactlythe the same color and size.
It takes about7-15 working days to US; about 10-30 working days to other countries.Transit time may be a little delayed because of thebadweather and customsinspection. If youdonot receive youritemwithin 30 working days since payment finished, please contact us immediately for further assistance.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via message.
We strive for 100% customer satisfaction! Positive response is very important to us. If you have any questions,please feel free to contact us via "Ask seller a question" . We will reply your email within 24working hours.