Olimex PIC-KIT3 PIC & MSP430 Programmer/Debugger Tool USB PICKIT3 Compatible New
Olimex PIC-KIT3 — PIC Programmer & Debugger
The Olimex PIC-KIT3 is a low-cost in-circuit programmer and debugger for Microchip PIC microcontrollers (MCUs) and dsPIC digital signal controllers. It’s essentially a compatible (and often cheaper) version of the classic Microchip PICkit3 tool used for programming and debugging PIC devices during development. �
Olimex +1
🧰 What It Is
🔌 Programmer / Debugger — Loads firmware into PIC/ dsPIC chips and allows debugging directly on your target board. �
Olimex
🔄 In-Circuit Serial Programming (ICSP) — Supports standard PIC ICSP protocols for programming without removing chips from your circuit. �
Olimex
💻 PC Connection — Uses a USB full-speed interface (USB-B connector) to connect to a computer running MPLAB X/IPE or MPLAB 8 IDE. �
Olimex
🔌 Key Features
💾 USB interface (Full Speed) — For communication with the PC. �
Olimex
🛠 Real-time background debugging — Lets you debug code while it runs on the target. �
Olimex
⚡ Low-voltage support — Works with target voltages from about 2 V (down to ~2.0 V) up to ~6 V. �
Olimex
🔁 Firmware upgradeable from your PC. �
Olimex
🔋 External power jack — Allows standalone programming without USB power. �
Olimex
🖱 Programmer-to-Go — You can store a compiled image in the PIC-KIT3 and program devices without a PC when in the field. �
DigiKey
🟢🔴 LED indicators — Status LEDs show activity and error states. �
Olimex
💻 Software Compatibility
Works with Microchip MPLAB X IDE, MPLAB IPE, and older MPLAB 8 (with some firmware/version considerations). �
DigiKey
The tool appears in MPLAB as a “PICkit3” programmer/debugger and is used just like the original. �
Olimex
📌 Typical Uses
✔ Flashing firmware to PIC and dsPIC microcontrollers
✔ Debugging embedded software on real hardware
✔ Educational and hobbyist PIC development
✔ Field programming using Programmer-to-Go
🔄 Notes & Differences vs Original PICkit3
Olimex PIC-KIT3 is compatible and functionally equivalent to Microchip’s PICkit3, but may use a different USB connector and cable, and may not include the USB cable with purchase. �
DigiKey
It supports the same basic programming and debugging features and interfaces directly with MPLAB tools. �
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.