Octoprint Ready Raspberry Pi 4 4G Touch Screen Kit 64GB Micro SSD

This is for a USED Raspberry pi 4 Octopi Touchscreen KIT. This unit was used in a 3D printing setup running Octopi with Octodash for the touchscreen controls. One of the USB 2.0 ports is damaged but the other 3 are ok. The kit will have the fan door with fan already attached but the non-fan door will also be included should you not want the fan.This unit will come with an Amazon Basics 64GB A2 Micro sd card pre-flashed and setup with the latest octopi (experimental build that includes the new camera stack) and octodash with basic configurations completed. This is to help jump start usage but beyond that you will need to add any plugins/customization you need. (Username and Password will be in the box)This was working with I switched to Klipper and a NUC and was tested again using the virtual printer option to ensure basic functions as well as the camera working.The unit is in good condition but does show some signs of wear including some blemishes on the edges (non-touch or visual) part of the screen.Images all items included are available in this listing.The Kit includes:

• Raspberry Pi 4 4GB board.
• Smart Pi Touch 2 Case
• Smart Pi Touch 2 accessories (Includes alternate back plate, non-fan cover door, Alternate front panels, Pi Camera enclosure, spare touch screen ribbon cable, two power splitters.)
• Raspberry Pi Camera v2.1
• 6ft pre-attached camera ribbon cable.
• Brand new spare 6ft camera ribbon cable
• Official Raspberry pi Power supply for the Pi 4
• Vilros power supply for the touch screen it self w/ on/off switch (no powering it off the pi board).
• Mini HDMI to HDMI Cable.
• Amazon Basics A2 64 GB Micro SD Card.*

*If you plan to run heavy continuous video recording (such as high-volume octolapse setups) it is highly recommended to either plug in an external USB drive or upgrade to a dedicated high endurance card.