ObsidianWire Tele Custom Universal Split Coil pre-wired kit for HH, HS, SH & SS
The ObsidianWire Tele Custom Universal Split Coil pre-wired kit for HH, HS, SH & SS
FOR HUMBUCKER LOADED TELECASTERS®
- Traditional 3-Way Tele®switching
- Built for Humbucker Loaded Telecasters
- 4 Optimized Modes (HH, HS, SH & SS)
- Improves clarity for humbuckers
- Balances single coils
- Fits Fender® Telecaster®
- Fits Squier®Telecaster® with adjustments
Obsidian®Coil Split
Adds even more versatility to your coil split compatible humbuckers. This replaces the tone control with a push / pull pot for splitting your humbuckers to single coils, and back again.
NOTE: Coil Split Requires compatible - Four Conductor Pickups
Super Easy, Solder-less Install All ObsidianWire Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with ObsidianWirePlug, Play & Enjoy connectors FOR HUMBUCKER LOADED TELECASTERS®
This wiring harness is a universal model made to be a perfect set for your humbucker loaded Telecaster, with an added fourth mode for two single coils for ultimate versatility.
Just select your mode from the Obsidian Smart switch, and you are set.
This harness is the perfect match for you if you have Telecaster loaded with the below pickups
Mode 1. HH Tele®(Humbucker + Humbucker) Mode 2.HS Tele®(Humbucker Bridge + Single Coil Neck) Mode 3.SH Tele®(Single Coil Bridge + Humbucker Neck) Mode 4. SS Tele®(Two Single coils / traditional Tele®mode) Why have different modes?
Humbuckers and single coils have different characteristics that require different things from a wiring harness to really let out their best qualities.
The Obsidian® Universal for Tele® harness allows you to easily setup your harness to automatically optimize the controls for each switch position, and thus, each of your pickups.
500k Controls for your humbuckers -Clearer, fuller humbucker output.More resistance through your tone and volume controls means less trebleescapes.
250k Controls for your single coils - Balanced single coil spank.The harsh highs of a raw single coil are sent to ground, leaving aharmonically rich but balanced single coil sound.
The Four Modes Explained MODE1: HH Telecaster (Two Humbuckers)
Turn the dial to \'HH\' for your Telecaster loaded with double humbuckers. You will get an optimized set of tone and volume controls with 500k pots, and a 0.022uf capacitor, for full clear output in all three switch positions.
Master Volume & Tone controls: (500kforfull clear output)
MODE2: HS Telecaster (Humbucker Neck + Single Coil Bridge Pickup)
Turn the dial to \'HS\' for your Telecaster loaded witha humbucker in the neck position, and a single coil in the bridge position. You will get an optimized set of tone and volume controls with 500k potsfor the humbucker for full clear output, and 250k pots for the single coil position to help tame the excess highs.
Switch Positions
1: Bridge Pickup (250k balancessingle coil highs)
2: Bridge + Neck Pickup (250k optimized for humbucker & single coil mix)
3: Neck Pickup (500kforfull clear output)
MODE3: SHTelecaster (HumbuckerBridge + Single CoilNeck Pickup)
Turn the dial to \'SH\' for your Telecaster loaded witha humbucker in thebridge position, and a single coil in theneck position.You will get an optimized set of tone and volume controls with 500k potsfor the humbuckerfor full clear output,and 250k pots for the single coil position to help tame the excess highs.
Switch Positions
1: Bridge Pickup(500kforfull clear output)
2: Bridge + Neck Pickup (250k optimized for humbucker & single coil mix)
3: Neck Pickup(250kbalancessingle coil highs)
MODE4: SS Telecaster ( Two Single Coils)
Also perfect for Single coil sized humbuckers
Call this bonus mode, just in case you ever want to convert your Tele back to a traditional SS, or two single coil Telecaster. This mode will give you a set of standard 250k controls with a 0.022uf capacitor for balanced tone and volume controls.
This is also perfect for using single coil sized humbuckers, which are often designed to work best with 250k pots.
Master Volume & Tone controls:(250kforfull clear output)
CRYSTAL CLEAR TONE
To make your tone crystal clear at lower volumes we also include an Obsidian® Custom Spec Treble Bleed Mod. This prevents tone \'muddiness\' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.
COMPONENTS Potentiometers:Obsidian®Custom CTS® Pots (+/-10%) Split Shaft 24 Spline with 1/4\" Adapters
Capacitors:(150 Series Polyester Film 0.022uf)(+/-5%)
Switch:Genuine Oak®3 Way Switch
Jack:Pro-WiredSwitchcraft® J11 Mono COMPATIBILITY
American series Fender®Telecasters- Direct Fit
Mexicanseries Fender®Telecasters- Direct Fit
Japanese Fender & Squiers- You will need to purchase agenuine Fender USA control plate and new 1/4\" knobs or ObsidianWireControl plate & Knobs
Pickups: Works with Single coils, single coil sized humbuckers, humbuckers and P90s.
Coil Split Upgrade Requires compatible - Four Conductor Pickups
Does NOT Fit:
- Thinline Telecaster
- G & L ASAT -May be fitted with adjustments to control slot size & newgenuine Fender USA control plate and new 1/4\" knobs or ObsidianWireControl plate & Knobs
- Other Guitars- We cannot guarantee that these will fit any other guitar.
Note:Aftermarket control plates will NOT fit.We recommend a genuine Fender control plate – Part Number:099-2058-000 orObsidianWire Control plate
Use US spec 1/4\" Solid shaft controlssuch as ObsidianWireKnobs. We recommend that you check your knobs are the correct size and replace them if necessary.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.