OEM Python EZSDEI7141 7141P Key Fob Remote PYTHON car starter control keyless

Thevehicle keyless remote key fob you are going to purchase from us is pre-owned;aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and putthem through a concise refurbishing process so we can guarantee our productsare delivered to you in a ready-to-program state. We offer these car clickersat a significant cost savings to stealerships so you can keep your hard earnedcash for something more fun while lightening your ecological footprint J. We callthat a win-win! Why wait? Add some convenience to your daily routine and helpsave the environment, order your recycled car remote control today!

Compatible FCC ID#(s):

EZSDEI7141

Alternate Spellings

EZS-DEI7141, EZS DEI7141, EZSDEI7141, EZSDEI7I4I, EZSDE17141, EZ5DEI7141

Part #(s)

7141P

Interchangeable part #s:

7131, 7131V, 7131P, 7131, 7141, 7141V, 7141P, 7141X, 7142, 7142V, 7142P, 7142X, 7151, 7151V, 7151P, 7151X

Button Count:

4

Battery (installed):

2; CR2016

Frequency:

433-434MHz

LED Light Color:

Blue

Condition Notes:

Pre-Owned ready to program to your compatible vehicle RKE system.

Compatible Aftermarket Installed Systems:

Arrow: 5.1

Avantguar : 5.1

Avital : 4103

Clifford (matrix) : 12, 12.2, 12.5, 70.5

Concept : 470, 650 MKII

Intelliguard: 770

Python : 460, 502, 702,902

Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop.

Programming option #1:

1) Door. Open Door.

2) Key. Turn the key to the ON position.

3) Choose. Within 5 seconds press and release the Valet/Program button the number of times corresponding to selected channel listed below.

After you have selected the channel, press the Valet/Program button once more and hold it. The LED flashes the same number of times as the channel selected and the siren (if connected) chirps to confirm the selected channel. DO NOT release the Valet/Program button!

4) Transmit. While holding the Valet/Program button, press the button from the transmitter. The unit chirps (if horn or siren are connected) to confirm that the transmitter has been taught to the receiver.

5) Release. Now that the code is learned, you may release the Valet/Program button and remove the key.

CHANNEL NUMBER FUNCTION

7) ----------------------------------- AUTO-LEARN STANDARD CONFIGURATION

9) ---------------------------------- DELETE ALL TRANSMITTERS

Note: If the factory preset PIN has been changed, the new PIN must be entered.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.