|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
OBD2 Breakout Box OBDII Protocol Detector Car 16-Pin CAN Power/Ground Detector
$28.49

OBDII Protocol Detector Breakout BoxThe automotive OBD II Protocol Detector &Breakout Box is a straight-through circuit detector for OBD II data. The communication protocol, power supply and grounding circuit of the OBD II on-board diagnostic system are easily and safely detected by connecting this instrument and the vehicle OBD II system. - 1. In the process of using decoder, error can be found and diagnosed OBD connector link.
- 2. You can monitor the OBD interface voltage and ground, showed low voltage. Display diagnostic stitching error.
- 3. Jump for OBD interface signals. Signal lines such as decoder of 7 to 15 vehicles online.
- 4. Rapid detection of OBD2 diagnostic connector whether every stitch of the normal communication.
- 5. Replace the battery, save the car data function. When replace the battery, plug OBD2 connector into the car, at the same time connect additional power to the control box, so that ensure vehicle data is not lost.
FUNCTIONS: - Ground Circuit Detection
- Protocol Detection
- Power Detection
- 16-PIN OBD Interface
- 45CM Extension Cable
- Built-in Input Jack
16-PIN NPUT JACK - The layout of the input jack completely simulatesthe 16-pin layout of the OBD Il interface, which can be connectedto a multimeter or an oscilloscope for testing.
DIAGNOSTIC INSTRUMENT INTERFACE - When the diagnostic instrument communicates with the vehicle,all 16 pins of OBD Il can be easily connected.
DC POWER JACK - Connect the power supply of DC 8V-30V.which can be used to replace the battery after powering the car ECU.
- Red LED Signal Light: If the car power supply is detected as normal, the red LED of pin 16 will always be on.
- Green LED Signal Light: If the car is detected grounded normally, the green LED of pin 4 and 5 will always be on.
- Yellow LED Signal Light: When the code reader communicates with the vehicle, the yellow LED on pin 2 or 6/7/10/14/15 will occur a waveform signal.
16-PIN OBD INTERFACE Compatible with all models with OBD Il interface. - Pins Definition
- 1 Self-Define by car manufacturer / 2 SAE-J1850 PWM CAN(+)
- 3 Self-Define by car manufacturer / 4 Body ground
- 5 Signal ground
- 6 CAN high (ISO 15765-4 and SAE-J2284)
- 7 K-line for ISO 9141-2 and ISO 14230-4
- 8 Self-Define by car manufacturer
- 9 Self-Define by car manufacturer
- 10SAE-J1850 PWM CAN(-)
- 11 Self-Define by car manufacturer
- 12 Self-Define by car manufacturer
- 13 Self-Define by car manufacturer
- 14 CAN low (SO 15765-4 and SAE-J2284)15 L-line for ISO 9141-2 and ISO 14230-4
- 16 Battery Positive
45CM EXTENSION CABLE - The cable body is made of elasic thermoplastic TPU material, which is characterized by high elasticity,high flexibility and high strength.
PRODUCT SPECIFICATIONS - Diagnostic port: OBDII
- Working voltage: DC 8v-30v
- Load: 2.0A
- Operating temperature: -20 to 70°C (-4 to 158°F)
- OBD II extension cable length: 45 cm
FEATURE: - The extension wire of OBD II connector adopts the technology of multithreading data connection, which makes the connection faster and smoother. The wire body is made of elastic thermoplastic TPU material, which is characterized by high elasticity, high strength and high resilience.
- When the decoder communicates with the vehicle, all 16 OBD II pins can be easily connected.
- The layout of the input jack completely simulates the 16 pin layout of the OBD II interface, so that more tests can be carried out quickly and visualized.
- Quickly, safely and conveniently check various signals of the vehicle.
- The built-in input jack can be connected to any type of 4mm banana plug, which is convenient for connecting with a multimeter or oscilloscope for further measurement.
Packing List: - 1pcs * Host breakout box
- 1pcs * Universal wire jumper (red*1 set, black*1 set, yellow*1 set, green*1 set)
- 1pcs * Manual
Warnings Tips: - This product is intended for automotive professionals only.
- This product is directly connected to the vehicle data link.
- Improper use may damage the vehicle data communication system, related circuits or systems.
- When you are not sure whether your operation will cause problems, please stop using this product immediately.
- When you are not sure about the electrical circuit on the car, do not use a jumper to short-circuit the input jack of this product.
- Do not use this product to connect a load device with a power exceeding 1 ampere.
- Do not directly short-circuit the 16th pin , the 4th pin, and the 5th pin of this product.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|