O'SKOOL Precision Aluminum Router Lift Kit for 4.2" Router Motors,RTS028
$523.11

The O\'SKOOL RTS028 is a precision aluminum router lift kit designed for removable router motors with a 4.2\" outside diameter. Its 9-1/4 x 11-3/4 x 3/8-inch hard-anodized aluminum insert plate installs in a compatible router-table opening and provides 4 inches of carriage travel. The included crank handle allows routine bit-height adjustments from above the table, helping users make controlled setup changes without repeatedly reaching beneath the tabletop. The height-adjustment system is built around measured movement. Each full crank turn moves the carriage 1/16\", while the zeroable indicator dial has 32 graduations, with each mark representing 1/512\" of carriage movement. After establishing a reference height, the dial can be turned manually to zero so subsequent adjustments can be tracked from a known starting point. Dual guide rods and linear bearings guide carriage movement, while the carriage lock secures the leadscrew setting after adjustment. If anti-backlash tension changes over time, three accessible socket-head screws allow the mechanism to be reset as directed in the manual. RTS028 provides separate controls for plate leveling, insert-ring leveling, and plate positioning. Leveling screws align the insert plate with the router-table surface, while four adjustment nuts beneath the insert-ring mount allow the selected ring to be leveled with the surrounding plate. Three cam positioners help reduce clearance in the table opening, resist plate movement caused by stock pressure and router vibration, and support consistent placement after removal and reinstallation. Centerline notches and laser-engraved scales on both sides provide visual references for fence zeroing and offset adjustments. The kit includes five twist-lock insert rings with 2-5/8-inch, 1-7/8-inch, 1-inch, and 3/8-inch openings, plus one ring designed for guide-bushing setups. An insert-ring wrench, crank handle, start pin, four 1/4-inch screws, 3 mm and 4 mm hex wrenches, and a 5/16-inch spanner are also included. The RTS028 is designed for removable router motors with a 4.2\" outside diameter and is compatible with Porter-Cable 7518, Triton/Tfbr001, Woodpeckers/1015420, Bora/Pm-6200, and Mlcs/9564. The separately sold O\'SKOOL RTS014 adaptor collar is compatible with 3.5\" palm-router motors, while the separately sold O\'SKOOL RTS025 adaptor collar is compatible with the Makita 1101. Verify both the router model and motor outside diameter before purchase. Router motor, router table, fence, router bits, and adaptor collars are not included. Disconnect the router from power before installation or adjustment. Do not attempt plunge cuts. Use the start pin only with bearing-guided bits as directed in the manual.
Zeroable Precision Height Adjustment: This router lift provides above-table height adjustment with the included crank handle. Each full turn moves the carriage 1/16\", while each of the 32 dial graduations represents 1/512\" of movement. Set the dial to zero at a reference height to track subsequent bit-height adjustments
Two-Stage Plate and Insert-Ring Leveling: Leveling screws align the 9-1/4 x 11-3/4 x 3/8-inch hard-anodized aluminum insert plate with the router-table surface. Four separate adjustment nuts beneath the insert-ring mount allow the selected ring to be leveled flush with the plate, helping provide a smoother surface around the bit opening
Stable Plate Positioning and Resettable Anti-Backlash: Three cam positioners help reduce clearance in the table opening, resist plate movement from stock pressure and router vibration, and support consistent placement after reinstallation. Guide rods, linear bearings, a carriage lock, and resettable anti-backlash tension help maintain controlled carriage movement during repeated use
Five Insert Rings For More Routing Setups: The router lift includes insert rings with 2-5/8 in, 1-7/8 in, 1 in, and 3/8 in openings, plus one ring designed for guide-bushing setups and an insert-ring wrench. Centerline notches and laser-engraved scales on both sides provide visual references for router-table fence zeroing and offset adjustments
Router Compatibility and Purchase Check: Designed for removable 4.2 in O.D. motors and compatible with Porter-Cable 7518, Triton/Tfbr001, Woodpeckers/1015420, Bora/Pm-6200, and Mlcs/9564. The separately sold O\'SKOOL RTS014 adaptor collar is compatible with 3.5 in O.D. router motors, while the separately sold O\'SKOOL RTS025 adaptor collar is compatible with the Makita 1101. Verify the router model and motor outside diameter before purchase. Router, table, fence, bits, and adaptor collars are not included

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.