Notifier N100-ISO SLC Loop Fault Isolator Module for FireWarden Series Panels

The N100-ISO should be placed between each device on the SLC loop to isolate a short-circuit problem between the modules. It is required for true Style 7 operation so that other devices can continue to operate normally in the event of a short-circuit on the SLC.

Features

• Powered by SLC loop directly, no external power required.
• Mounts in standard junction boxes (4.0\"/10.16 cm square, 2.125\"/5.398 cm deep).
• Integral LED blinks to indicate normal condition. Illuminates steady when short circuit condition is detected.
• High noise (EMF/RFI) immunity.

Applications

The Fault Isolator Modules should be spaced between groups of sensors in a loop to protect the rest of the loop. Use to isolate short circuit problems within a section of a loop so that other sections can continue to operate normally. The N100-ISO supports a maximum of 25 devices in-between isolators, except when using relay bases.

NOTE: LOADS PER RELAY BASE AND ISOLATORS/ISOLATOR
BASES: The maximum number of addressable devices between isolators (or B224BIA isolator bases) is 25 devices.

Brand new in original packaging. Ships same business day from Atlanta, GA when ordered by 3 PM ET. 30-day returns. 1-year warranty.