Notifier FRM-1 FlashScan Addressable Relay Module Two Form-C Contacts New

FRM-1 is an addressable relay module for Notifier intelligent fire alarm panels. It gives the panel two Form-C dry contacts on the SLC loop, used for jobs such as fan or damper control, door holder release and air-handler shutdown. The contacts switch on command from the panel and can be programmed to follow system events.

• Two isolated Form-C contact sets that switch together (DPDT)
• Address set with built-in rotary decimal switches
• Panel-controlled LED indicator
• Can replace a CMX-2 module that was set up for Form-C operation
• Mounts on a 4 in square box or a DNR(W) duct voltage15 to 32 VDCMax current draw6.5 mA (LED on)Average current230 µA direct poll; 255 µA group pollContact rating3 A @ 30 VDC resistive, non-coded (other loads per datasheet table)AddressesOne of 159 module addresses per SLC loop (99 on CLIP loops)Dimensions4.5 in H x 4 in W x 1.25 in DMounting box4 in square, 2-1/8 in minimum depthOperating temperature32°F to 120°F (0°C to 49°C)Humidity10% to 93% non-condensingBefore you order

  The module does not supervise the circuits wired to its contacts. For non-power-limited wiring the CB500 barrier is required; the SMB500 box is available for surface mounting.

  Condition: New. Ships same business day when ordered before the daily cutoff.

  Questions about compatibility or larger quantities? Send us a message through .