NodeMCU V3 WeMos-Compatible ESP8266 WiFi Board. COMPACT SIZE: 49x26mm (vs 58x31mm standard). 3.3V LOGIC -- do NOT apply 5V to any GPIO pin. WiFi is 2.4GHz ONLY. Headers NOT pre-soldered -- soldering iron required.
Same specs as standard LoLin NodeMCU V3 but smaller. Does NOT fit LoLin Base I/O Expansion Breadboard. Includes 2x 15-pin header strips (unsoldered).
Key Specs:
• MCU: ESP8266 (80MHz, 4MB/32Mbit flash)
• GPIO: 10 digital + 1 analog (A0, 3.3V max)
• WiFi: 802.11 b/g/n, 2.4GHz, STA/AP/STA+AP
• Power: Micro USB 5V or VIN 4.5-9V (10V max)
• Current: ~70mA typical, 200mA max (WiFi TX)
• USB Chip: CH340G
• Size: 49x26x4mm (1.9x1.0x0.16in)
Safe pins: D1, D2, D5, D6, D7. Pins D3, D4, D8 have boot restrictions. SD1/SD2/SD3 reserved. USB data cable required (not included).
Ships from USA. Fast free shipping, hassle-free returns.
Electronics for IoT, Prototyping & DIY
NodeMCU V3 WeMos-Compatible ESP8266 WiFi Board. COMPACT SIZE: 49x26mm (vs 58x31mm standard). 3.3V LOGIC -- do NOT apply 5V to any GPIO pin. WiFi is 2.4GHz ONLY. Headers NOT pre-soldered -- soldering iron required.
Same specs as standard LoLin NodeMCU V3 but smaller. Does NOT fit LoLin Base I/O Expansion Breadboard. Includes 2x 15-pin header strips (unsoldered).
Key Specs:
• MCU: ESP8266 (80MHz, 4MB/32Mbit flash)
• GPIO: 10 digital + 1 analog (A0, 3.3V max)
• WiFi: 802.11 b/g/n, 2.4GHz, STA/AP/STA+AP
• Power: Micro USB 5V or VIN 4.5-9V (10V max)
• Current: ~70mA typical, 200mA max (WiFi TX)
• USB Chip: CH340G
• Size: 49x26x4mm (1.9x1.0x0.16in)
Safe pins: D1, D2, D5, D6, D7. Pins D3, D4, D8 have boot restrictions. SD1/SD2/SD3 reserved. USB data cable required (not included).
Ships from USA. Fast free shipping, hassle-free returns.
NodeMCU V3 WiFi Development Board – WeMos Compatible – ESP8266 – 32Mbit (4MB) Flash – CH340G USB
This WeMos-compatible NodeMCU V3 is a compact WiFi development board based on the ESP8266 with 32Mbit (4MB) flash memory. It features built-in 802.11 b/g/n WiFi (2.4 GHz), 10 digital GPIO pins, 1 analog input, CH340G USB-to-serial programming, and a narrow form factor that fits on a standard solderless breadboard -- ideal for IoT projects, home automation, and wireless sensor networks.
⚠️ Note: This WeMos-compatible NodeMCU WiFi Development board features the same specifications as the standard LoLin NodeMCU V3 board, with the following differences:✅ The size is reduced to 49 × 26 mm (1.9 x 1.0 inches) from 58 × 31 mm (2.3 x 1.2 inches). The narrow form factor fits on a standard solderless breadboard.
✅ It comes with two sets of 15-pin headers (not already soldered to the board), giving the user the option to use connectors or solder directly.
✅ It does not fit the LoLin Base I/O Expansion Testing Development Breadboard.This is a 3.3V logic level board. All GPIO pins operate at 3.3V. Applying 5V to any GPIO pin will permanently damage the ESP8266 chip. WiFi supports 2.4 GHz only, not 5 GHz.⚡ Key Features
- Built-In WiFi: ESP8266 with 802.11 b/g/n WiFi (2.4 GHz)
- 32Mbit (4MB) Flash: Ample storage for larger projects, OTA updates, and file systems
- Three WiFi Modes: Station (STA), Access Point (AP), and STA+AP combined
- Built-In TCP/IP Stack: Supports up to 5 simultaneous TCP client connections
- Arduino IDE Compatible: Program using the familiar Arduino IDE with the ESP8266 board package
- Multi-Platform Support: Also supports NodeMCU/Lua, MicroPython, and PlatformIO
- 10 Digital GPIO Pins: D0–D8 plus D9/D10 (shared with TX/RX), supporting interrupt, PWM, I²C, and one-wire (except D0)
- 1 Analog Input: 10-bit ADC on pin A0 (3.3V max input)
- CH340G USB-to-Serial: Reliable USB programming and serial communication via Micro USB
- OTA Support: Over-The-Air firmware updates via WiFi after initial upload
- Compact & Breadboard Friendly: Narrow 49 × 26 mm form factor fits on a standard solderless breadboard
- Unsoldered Headers Included: Two sets of 15-pin headers -- choose to use connectors or solder directly
📐 SpecificationsMicrocontrollerESP8266 (Tensilica L106 32-bit)WiFi802.11 b/g/n, 2.4 GHzCompatibilityWeMos / NodeMCU V3 compatibleClock Speed80 MHz (configurable to 160 MHz)Flash Memory32Mbit (4 MB)SRAM64 KB instruction / 96 KB dataDigital I/O Pins10 usable GPIO (D0–D8, plus SD1–SD3 reserved)Analog Input1 (A0, 10-bit ADC, 3.3V max)GPIO Drive Capability15 mA per pinOperating Voltage (Logic)3.3VPower Input4.5V – 9V (10V max) via VIN, or 5V via Micro USBOperating Current~70 mA typical, 200 mA max (WiFi transmission)Standby Current<200 µAUSB-to-Serial ChipCH340GSerial Baud Rate110 – 460,800 bpsWiFi ModesSTA / AP / STA+APTCP ConnectionsUp to 5 simultaneous clientsPin Headers2× 15-pin headers included (unsoldered)Board DimensionsApprox. 49 × 26 × 4 mm (1.9 x 1.0 x 0.16 inches) L × W × H (without headers)📌 Pinout Quick ReferenceBoard PinESP8266 GPIOFunctionNotesD0GPIO16Digital I/ONo interrupt/PWM/I²C. Deep sleep wake.D1GPIO5Digital I/O, SCL✅ Safe for general useD2GPIO4Digital I/O, SDA✅ Safe for general useD3GPIO0Digital I/O⚠️ Must be HIGH at bootD4GPIO2Digital I/O, LED⚠️ Must be HIGH at boot. On-board LED.D5GPIO14Digital I/O, SCLK✅ Safe for general useD6GPIO12Digital I/O, MISO✅ Safe for general useD7GPIO13Digital I/O, MOSI✅ Safe for general useD8GPIO15Digital I/O, CS⚠️ Must be LOW at bootD9 / TXGPIO1UART TXUsed during uploadD10 / RXGPIO3UART RXUsed during uploadA0ADC0Analog Input10-bit ADC. Max 3.3V input.📦 What\'s in the Box
- 1× NodeMCU V3 WeMos-Compatible ESP8266 WiFi Development Board
- 2× 15-pin header strips (unsoldered -- user installs as needed)
USB cable is not included. A Micro USB data cable is required for programming and power (charge-only cables will not work).
🛒 What You\'ll Need
- Micro USB Data Cable -- for programming and power (must be a data cable, not charge-only)
- Soldering Iron -- to solder the included pin headers to the board (if using headers)
- Arduino IDE -- free download from arduino.cc, with the ESP8266 board package installed
- CH340G USB Driver -- usually included with Windows 10/11, macOS, and Linux; manual install if needed
🔌 Compatible With
- Arduino IDE (with ESP8266 board package)
- NodeMCU / Lua solderless breadboards (via header pins, once soldered)
- WeMos-compatible shields and accessories (verify 3.3V compatibility)
🎯 Typical Applications
- IoT devices and smart home automation
- WiFi-connected web servers and dashboards
- Wireless sensor nodes (temperature, humidity, motion, light)
- MQTT clients for Home Assistant, Node-RED, and other platforms
- Remote data logging and monitoring
- WiFi-controlled relays, LEDs, and actuators
- Weather stations and environmental monitors
- WiFi Access Point and Smart Config provisioning
🚀 Quick Setup
- Solder the included 15-pin headers to the board (if using a breadboard or connectors)
- Install the CH340G USB driver if your computer doesn\'t recognize the board when plugged in
- Open the Arduino IDE, go to File > Preferences, and add the ESP8266 board manager URL
- Go to Tools > Board > Boards Manager, search for esp8266, and install the package
- Select Tools > Board > \"NodeMCU 1.0 (ESP-12E Module)\"
- Connect the board via Micro USB, select the correct COM port, and upload the Blink example
💡 Tip: The built-in LED is active LOW -- writing LOW turns it ON, and HIGH turns it OFF. The ESP8266 only supports 2.4 GHz WiFi -- it cannot connect to 5 GHz networks. Pins SD1, SD2, and SD3 are connected to the internal SPI flash -- do not use them for general I/O. This board does not fit the LoLin Base I/O Expansion Testing Development Breadboard.⚠️ Important Notes
- 3.3V Logic Level: All GPIO pins are 3.3V -- applying 5V to any pin will permanently damage the ESP8266 chip. Use a level shifter for 5V devices.
- Analog Input Limit: Maximum input voltage on A0 is 3.3V -- exceeding this can damage the ADC
- VIN Voltage Limit: The VIN pin accepts 4.5V–9V (10V absolute max) -- do not exceed 10V
- Headers Not Pre-Soldered: The included pin headers must be soldered by the user. A soldering iron is required if you want to use the board on a breadboard or with connectors.
- Boot Pin Restrictions: D3 (GPIO0), D4 (GPIO2), and D8 (GPIO15) have specific state requirements during boot -- connecting peripherals that pull these pins to the wrong state will prevent the board from starting
- Reserved Pins: SD1, SD2, and SD3 (GPIO8, 9, 10) are connected to the internal SPI flash -- do not use them for general I/O
- WiFi is 2.4 GHz Only: The ESP8266 does not support 5 GHz WiFi networks
- GPIO Current Limit: Each pin can source/sink approximately 15 mA -- use a transistor or MOSFET for higher-current loads
- Not LoLin Base Compatible: This compact board does not fit the LoLin Base I/O Expansion Testing Development Breadboard
- Use a Data USB Cable: Many Micro USB cables are charge-only -- if the board isn\'t recognized, try a different cable with data lines
🏪 About Envistia Mall
Envistia Mall is a US-based electronics retailer specializing in development boards, sensors, modules, and components for makers, engineers, and educators. We ship from the United States with fast handling times. Product documentation and technical support are available at our dedicated support site.
📦 Fast Free US Shipping | 🔄 Hassle-Free Returns | 📧 Responsive Customer Support
Visit our store for more ESP8266 and ESP32 boards, NodeMCU development boards, Arduino-compatible boards, WiFi modules, sensors, relay modules, jumper wires, breadboards, and other essential components for your IoT and electronics projects.
Featured Products
WeMos D1 CH340 WiFi Arduino UNO R3-Compatible Development Board ESP8266 ESP-12F
$9.49
NodeMcu LUA ESP8266 ESP-12 CH340G LoLin V3 WiFi IoT Development Board Module US
$8.59
Teensy 4.1 ARM Cortex-M7 Microcontroller Development Board w/, w/o Soldered Pins
$37.50
Audio Adapter Shield 4.0 for Teensy 4.0 & 4.1 w/ Male & Female Headers
$14.89
MEGA2560 PRO MINI ATmega2560-16AU CH340G Development Board
$18.89
PJRC Teensy 4.1 iMXRT1062 Microcontroller Development Board w/ SD Card, Ethernet
$37.50
MEGA2560 R3 ATmega2560-16AU CH340G Development Board with or without Cable
$22.49
PJRC Teensy 4.1 iMXRT1062 Microcontroller Development Board w/ 2X 8MB PSRAM ICs
$39.50 Add suggested items to your listings - Check it out on 3Dsellers.com
· All Rights Reserved to My Store ·
listing template by 3Dsellers.com - Try for Free!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.