Nintendo NES OpenTendo Motherboard and Power / AV Board - New - Your Choice Of Color!
Also included is a COMPLETE components kit to populate the motherboard and power / AV board.
Even the hard to find diode arrays, transistors, RAM Chips and lockout chip ALL NEW
- Boards are all brand new replacement motherboards for the front loader NES designed by Redherring32
- Boards come in 4 colors. Matte Black, Green, Red, and Blue
- Pictures of completed boards are just for references only
- If you want just the motherboard only (no kits or power / AV board) select No for the drop down menus.
- You can also get just the Power / AV board kit as well with the last dropdown menu.
- ALL parts in the kits are BRAND NEW components, nothing has been salvaged from a donor console.
- Each component in the kit is individually sealed in a bag.
- The bags have easy to understand labels to ensure each component is easily identifiable as well as where it gets populated on the motherboard. See pictures for examples.
The motherboard kit includes the following:
CIC Lockout Chip -
- Lockout chip is also designed by RedHerring32
- Lockout chip is assembled by me and tested for functionality
Resistors -
1 x 10k Resistor Array
1 x 6.8k Resistor Array
1 x 1Meg Ohm
2 x 510 Ohm
2 x 100 Ohm
1 x 220 Ohm
1 x 47k Ohm
2 x 20k Ohm
1 x 12k Ohm
1 x 220k Ohm
1 x 1.2k Ohm
1 x 150k Ohm
1 x 100k Ohm
1 x 2.2k Ohm
2 x 1k Ohm
Capacitors -
1 x 100uF
1 x 2.2uF
1 x 1uF
20 x 10nF
12 x 330pF
4 x 220pF
2 x 100nF
1 x 18pF
1 x 15pF
2 x 56pF
2 x .015uF
1 x 30pF Trim Capacitor
Integrated Circuits -
2 x 74HC368 Buffer
1 x 74LS139 Decoder
1 x 74HCU04 Inverter
1 x 74HC373 Latch
Semiconductors and Misc -
1 x SA937 Transistor
2 x SC2021 Transistors
2 x uPA64HA Diode Arrays
2 x DAN601 Diode Arrays
1 x 21.477272 MHz Clock
1 x 4 MHz Resonator
1 x 39uH Inductor
1 x Ferrite Bead
2 x 5.1V Zener Diode
Optional RAM -
2 x RAM Chips
- Power / AV board is a 4 layer PCB keeping power and ground on their own layer ensuring the best video signal.
- Power / AV kit includes a choke across input voltage to keep the electrical noise down as low as possible.
- Power / AV board color will match motherboard color if purchased. If you want a different color Power / AV board send me a message.
- Caution: The heat sink on the 5V regulator will be very HOT when the NES is running.
- Tip: Test fit power / AV module with the motherboard in a NES shell base before making final solder power LED and switch are not included in the kit
Power / AV Module kit includes the following:
Resistors -
1 x 110 Ohm1 x 300 Ohm
Capacitors -
1 x 2000uF2 x 10nF1 x 1uF1 x 22uF2 x .1uF1 x 330uF1 x 220uF1 x 560pF1 x .33uF1 x 47uF
Integrated Circuits -
5VDC Regulator with Heat Sink
Semiconductors and Misc -
1 x PNP Transistor1 x Full Bridge Rectifier1 x 47uH Choke1 x Power Barrel Jack3 x RCA Colored Jack (White, Yellow, Red)1 x Board to board header with ground dir=\"ltr\" style=\"margin-top:0; margin-bottom:0;\">PPU, CPU, and connector headers are not included in this kit.
- I will be adding PPUs, CPUs, and connectors to the kit in the future, for now they can be found in my store also with free shipping.
Every component in this kit is brand new and a direct replacement for the corresponding components used on the original NES. I am selling the components necessary, not a guide on how to complete this project. Unfortunately I am unable to give one on one support with soldering or troubleshooting problems. This project does require soldering skills to complete.If you have any questions, please reach out. I will try my best to answer any questions I can, but I can not give one on one instructions on how to installthe components.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.