Used and tested working. Includes wall-plate and screws. White color but maybe slightly off due to indoor sun exposure.
The VCS-2D-IM and the VCM-2D-IM are wall-mount, Decora® style impedance magnifying speaker volume controls. The VCS is a stereo control and the VCM is a mono control. They connect between the speaker-level output of an amplifier, speaker selector, etc. and your speaker(s).
Both the VCS-2D-IM and the VCM-2D-IM adjust the volume of remotely located speakers. They adjust the volume of speakers connected to them by attenuating the amplifier signal. Niles volume controls use autoformers instead of L-pads for the volume controlling element. This assures minimal internal power dissipation with virtually no power wasted as heat.
The VCS-2D-IM and the VCM-2D-IM are Impedance Magnifying (IM) volume controls. They have additional autoformer windings which magnify the impedance of the speakers connected to them. These windings are selected via a jumper on the PC board. Since the IM windings are in addition to the normal attenuation windings, unlike other brands, you can still use all 12 steps to adjust the volume of the sound.
Since the volume control now provides impedance protection for your amplifier you can create systems without any additional impedance matching devices between the volume control and the amplifier. For example: A typical application of IM controls would be a system with eight pairs of 8 ohm speakers throughout the house. Each pair of speakers is connected to an IM volume control. Each volume control has its jumper placed in the 8x position. It is no longer necessary to have any kind of external impedance matching speaker device to protect the amplifier. The amplifier runs at normal operating temperatures even when playing all eight speakers at once.
The VCS-2D-IM and the VCM-2D-IM offer a number of improvements over other volume controls.
● Impedance magnifying jumpers allow you to control the impedance of the speakers connected. You can magnify the speakers impedance by a factor of 2, 4, 8 or 16.
● Niles IM volume controls use a 12-position control regardless of how much impedance magnification you are using. You get a broader range of adjustment—there are always ten steps of attenuation. Steps 11-6 attenuate -3 dB per step; steps 5-2 are -6 dB per step. Step 12 is “full-on” and step 1 is “full-off” . Other controls use up your volume adjustment for impedance matching.
● POP-FREE switching between all steps.
● 100% tested,electronically and acoustically, for frequency response, distortion and power handling.
● Stereo (VCS) and Mono (VCM) versions allow you to economize when appropriate.
• Mounting depth of only 2 9/16". Fits into standard 18 cubic inch 1-gang electrical boxes.
• Interchangeable Decora-style inserts for fast, easy color change. Inserts and knobs (also sold sepa-rately) are available in a variety of colors.
•Isolated left and right channel grounds make it safe for use with any amplifier.
• May be used with 4, 6, or 8 ohm speaker systems.
• Ideal for both home and commercial sound installations.
• Only screwdriver and wire stripper required for installation.
• Power handling: 60 watts/channel.
• Frequency response: 20 Hz to 20 kHz + 2 dB.
• Available colors: White, Bone, Almond, or Black.
• Ten year parts and labor warranty.
• Proudly made in the USA.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.