New TracOne Thule Tracrac tool box mount kit
$89.95

This brand new Thule Tracrac tool box mounting kit allows you to mount your across-the-bed toolbox on your TracOne, or T-Rac Pro-2 fixed rack.
Please note: You need to ensure the part of the tool box that sits in the bed will still slide into the bed taking into account the C clamps take up space in the bed as well.
Also some trucks like Rams and Silverado’s are wider at the front of the bed, so take your width measurement at the front of the bed between your existing C clamps and where the back end of the tool box will be.
The kit contains a set of 4 Thule Tracrac C clamps with a threaded hole in the top of the clamp to attach the tool box, 2 new long screws and clamp feet and 2 small pieces of TracOne foot and pad, to keep the tool box level. The kit also contains 4 short button head steel screws and stainless steel fender washers to attach the box to the C clamps. The button head screws have the same 7/32” Allen head as the rest of the TracOne.
To install the kit, you remove the existing front 2 C clamps without the threaded holes in the top, from your TracOne and reuse the screws and clamp feet on the 2 new C clamps with threaded holes in the kit. These 2 clamps support the front of the tool box.
The kit contains 2 new C clamps with threaded holes in the top, long screws, clamp feet and 2 small pieces of clamp foot and rubber pad for the back to the tool box. The small piece of foot and pad ensures the tool box will sit level.
Please note you cannot use this kit with the second and third generation Tacomas because they do not have a standard truck bed rail. You need my kit containing a set of generation-specific E clamp adapters that slide into your Toyota deck bars. The latest Tundra’s now have composite beds as well, and you can’t use C clamps on those trucks either. The first generation Tacomas do have a standard truck bed rail, so this kit can be used.
For questions on compatibility, please reference the Thule web site. If you still have questions, send me a message.
These parts are directly from Thule Tracrac.
The C clamp is powder coated aluminum. The 3/8-16 round head screw is steel and the clamp foot is mill finish aluminum.
When installing these clamps, it is always a good idea to use a small amount of aluminum anti sieze on the threads any time you have different metals in direct contact with each other. The button head screw takes a 7/32” Allen head, which is the same as the button head screws necessary to adjust the width of the uprights on the crossmembers.
Also, given the clamp is aluminum, do not over tighten the screw, as you can spread the C clamp, and if you continue to over tighten the screw, break the cast aluminum clamp.
If you have a T-Rac Pro-2 with threaded holes in the top of the C clamps, and just need 2 additional C clamps with threaded holes in the top and the small pieces of foot and pad, let me know.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.