Hydraulic Filter Element 0165R010BN4HC For HYDAC 10 Micron Absolute Return Line
1 Pc · 10 Micron Absolute · For HYDAC 0165R010BN4HC
Highlights
This 0165 size element sits in the return line and takes wear debris out of the oil before it reaches the reservoir. Microglass media, 10 micron absolute, 60 mm (2.36 in) OD, 229 mm (9.00 in) long, 3 bar bypass in the closed cap.
Specifications
Type: Hydraulic Return Line Filter Element
MPN: 0165R010BN4HC
OE Part Number: 1262969
Interchange Part Number: P564859, 938275Q, HD419, R41D10GV, RE065G10B, HP165RNL912MSB
Compatible Equipment Make: HYDAC
Compatible Make: HYDAC
Compatible Model: 0165 Return Line Filter Housing
Fitment: 0165 Housing, 165 L/min, 10 Micron
Outside Diameter: 60 mm (2.36 in)
Inside Diameter: 34 mm (1.34 in)
Overall Length: 229 mm (9.00 in)
Filtration Rating: 10 Micron Absolute
Beta Ratio: 1000, 99.9 Percent
Filter Media: Microglass
Collapse Pressure: 20 bar (290 psi)
Bypass Valve: 3 bar (43 psi)
Max Flow Rate: 165 L/min (43 gpm)
Seal Material: NBR
Operating Temperature: -30 C Min, 100 C Max
Configuration: One Open Cap, One Bypass Cap
Quantity: 1
Application: Hydraulic Return Line
Warranty: 3-Year Warranty
Fitment
A return line element for 0165 size housings. One cap is open and seals the clean side; the other carries the bypass valve, so the micron figure and the bypass setting both matter here.
Replaces: 1262969
Cross: P564859, 938275Q, HD419, R41D10GV, RE065G10B, HP165RNL912MSB
Fits: For HYDAC 0165 return line housings
Body: 60 mm (2.36 in) OD, 34 mm (1.34 in) ID, 229 mm (9.00 in) long
Rating: 10 micron absolute, beta 1000, 99.9 percent
Bypass: 3 bar (43 psi) in the closed cap
Collapse: 20 bar (290 psi)
Flow: 165 L/min (43 gpm)
Seal: NBR, -30 C Min, 100 C Max
Confirm by: the code on the old element, including the micron figure
Drain the reservoir below the housing, unbolt the cover, pull the old element out by the handle, wipe the seat, then seat the element and tighten the cover per the housing plate. Start the pump and check the cover joint for weeps.
Package
1 × Hydraulic Filter Element 0165R010BN4HC
Please Check Before Ordering
60 mm (2.36 in) OD, 34 mm (1.34 in) ID, 229 mm (9.00 in) long, 10 micron absolute, 3 bar bypass. Codes 0165 R 003, R 005 and R 020 share this body and differ in micron only.
After-Sales Service
Warranty: 3-Year Warranty
Returns: 30-Day Free Returns
Support: Message Us with Your Part Number
On Nov 16, 2026 at 19:25:37 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.