This is a professional optical lab / ophthalmic lens edging machine used for shaping and finishing eyeglass lenses. It is intended for optical labs, optometry offices, ophthalmic equipment resellers, repair technicians, and buyers familiar with National Optronics equipment.
Technical / Compatibility Details
This is a National Optronics Horizon II edger, serial number 6235.
Label information shown on the unit:
- Location: Charlottesville, Virginia, U.S.A.
- Model: Horizon-II
- Serial Number: 6235
- Power: 115/120V
- Current: 12.4A
- Frequency: 60Hz
- ETL Listed Laboratory Equipment
The Horizon II is a dry ophthalmic lens edging system. National Optronics equipment is used for processing plastic / organic lens materials, not glass lenses.
The front control panel includes controls and indicators for:
- Power On / Off
- Stop
- Flow rate adjustment
- Tracking pressure gauge and adjustment
- Mechanical counters
Included items are:
- National Optronics Horizon II ophthalmic lens edger
- Installed cutter/motor/carriage assemblies shown inside the unit
- Built-in control panel with Start, Stop, Finish, Pause, Rimless, and Chuck controls
- Built-in tracking pressure gauge/control
- Side-mounted air regulator / pressure gauge assembly
- Clear upper shield / cover assembly
- Attached power cord
- Internal components shown in the photos
No air compressor, external vacuum system, blocker, blocks, lens patterns, test lenses, manuals, calibration tools, replacement cutters, spare parts, carts, or accessories are included unless specifically shown in the photos or listed above.
Testing / Condition
This unit was acquired through Indiana University surplus. The note with the unit indicated that it was working, but needed calibration.
We briefly powered the unit on in our warehouse. The unit powered on, the front panel lights illuminated, and the buttons responded when selected. We briefly initiated a cycle and then stopped it. We did not run a complete lens edging/cutting cycle, and we did not cut or finish a test lens.
The machine appears to respond to the controls, but it has not been fully production-tested by us. We did not verify lens sizing accuracy, bevel accuracy, rimless cutting, groove cutting, chuck pressure, tracking pressure accuracy, flow rate accuracy, calibration, cutter condition, or full operation under load.
This unit should be cleaned, calibrated/validated with test lenses, and serviced by a qualified optical equipment technician before being placed back into production use.
Cosmetically, the unit is used and shows normal wear from prior optical lab use. The interior has visible dust/debris/residue from lens edging, and there is visible wear/deterioration to some of the interior foam/lining material. Please review all photos carefully, as they are part of the description.
Important Calibration / Service Note
This machine is being sold as a used working-pull style unit that powers on and responds to controls, but it is not being sold as newly serviced, calibrated, refurbished, or production-ready.
Shipping Note
This is a heavy and sensitive optical lab machine with internal mechanical, pneumatic, and cutting components. Local pickup or freight shipment is recommended. If shipped, the unit will need careful packaging to protect the case, internal components, clear shield, controls, and pressure gauge.
Business Disclosure
🦅 Veteran-Owned Business • “As-Represented Guarantee” We accept all returns if unsatisfied. Buyer pays return shipping.
Requirement
Garvis Med Equipment is a used medical equipment wholesaler. We do not service or refurbish the items we sell unless stated otherwise. All items are sold used, as-is, with no guarantees or warranties implied. It is the buyer’s responsibility to inspect and refurbish items before use in patient care.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.