|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
National Instruments PCI-6024E NI DAQ Card, Analog Input, Multifunction
$90.00

ThePCI-6024E(Part number:777743-01) is an efficient and reliableMultifunction DAQin the affordable E Series fromNational Instruments. ThePCI 6024E Multifunction DAQoffers sixteen single-ended input channels or eight differential analog input channels, along with two voltage analog output channels. The user can select any channel with the help of the software interface. The instrument comes with a built-in analog to digital converter, which enables the device for successive approximation for various measurement requirements. TheNI PCI 6024EDAQ Card offers a resolution of twelve bits and two counters of 24 bits.
The device is run using the NI-DAQ driver software. The hardware can be programmed using software packages/application development environments (ADEs) such as LabVIEW, Measurement Studio, or VirtualBench – using any of the aforementioned 3 greatly increases the speed of development time.
TheNational Instruments PCI 6024Eprovides a sample rate for real-time measurements. This sample rate enables the user to complete quick and accurate analysis, with the value of 200 kS per second. The output rate is 10 kS per second. This helps improve the efficiency of the measurement system in tough industrial environments. The instrument also incorporates an input coupling mechanism for DC terminals and has a valuable overvoltage protection feature for the user’s safety. This model does not come with a FIFO buffer. Other features of thisMultifunction DAQinclude a self-calibration feature, temperature drift protection circuitry, and an onboard temperature sensor.
ThePCI 6024E DAQutilizes the Real-Time System Integration (RTSI) bus to synchronize multiple measurement functions to one timing or trigger event. The user can route trigger and timing signals between multiple functions on a maximum of five DAQ instruments in a PCI system. TheNI PCI 6024Ealso incorporates a 68-pin male SCSI-II I/O connector. ThePCI-6024ECard has +4.65 to +5.25 VDC at 1 A power available at the I/O connector.The device weighs 4.1 oz., and measures 6.9 x 4.2 in. in physical dimensions. Comes withCB-68LP terminal block and interface cable and some original paperwork. Was pulled from working system and stored in antistatic bag.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|