National Instruments NI-9219 Input Module (785994-01)
$650.00

National Instruments NI-9219 Analog Input. NIB
The NI-9219 is designed for multipurpose testing. With the NI-9219, you can measure signals from sensors such as strain gages, resistance temperature detectors (RTDs), thermocouples, load cells, and other powered sensors, as well as make quarter-bridge, half-bridge, and full-bridge current measurements, with built-in voltage and current excitation. Each channel is individually selectable, so you can perform a different measurement type on each channel.
Key Specifications
• Channel count and resolution. Features 4 individually selectable differential analog input channels, each equipped with a dedicated 24-bit delta-sigma ADC for simultaneous sampling.• Maximum sample rate. Supports up to 100 S/s per channel (50 S/s per channel when using built-in 50/60 Hz noise rejection modes).• Channel-to-channel isolation. Provides 250 Vrms (CAT II) continuous channel-to-channel and channel-to-earth isolation to prevent ground loops and protect against transient voltages.• Built-in signal conditioning. Includes integrated voltage and current excitation for bridge and RTD sensors, as well as cold-junction compensation (CJC) for thermocouples.• Hardware variants. Available in standard (part number 785994-01) and conformal-coated (part number 779781-02) versions, using 6-position spring-terminal connectors.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.