USB to GPIB Controller & Portable Bus Analyzer - GPIB-USB-HS+
Product Overview
The GPIB-USB-HS+ is a Hi-Speed USB to IEEE 488 (GPIB) controller that turns any computer with a USB port into a
full-function GPIB controller and portable bus analyzer. Install the IEEE 488.2 driver, plug into a free USB port,
and automate up to 14 programmable instruments - oscilloscopes, digital multimeters, spectrum analyzers, power
supplies, signal generators and switch units - with no plug-in board and no external power supply. USB bus-powered,
palm-sized and rugged, it is the simplest way to keep legacy GPIB test systems running on modern PCs.
✨ Key Features
- Hi-Speed USB 2.0 host connection (up to 480 Mb/s); fully bus-powered - no external adapter needed
- IEEE 488.2 compliant controller: 3-wire transfer up to 1830 KB/s, HS488 handshake up to 7920 KB/s
- Onboard GPIB analyzer captures bus traffic and helps debug handshakes, timeouts and software issues
- Controls up to 14 programmable GPIB instruments from a single USB port
- 24-pin IEEE 488 connector with M3.5 x 0.6 jackscrews for a secure, vibration-resistant connection
- Compact and portable: 8.0 x 6.1 x 2.0 cm, 153 g including the attached 2 m USB cable
- Plug-and-play setup; works with common test software and SCPI / VISA command sets
- Industrial enclosure, 0 C to 55 C operating range, CE / FCC / IEC 60950-1 compliant
🧪 Usage Scenarios
- Automated test equipment (ATE) and production functional test stands
- R&D bench automation: oscilloscope, DMM and spectrum analyzer control plus data logging
- Calibration benches, repair and field-service workshops
- University teaching labs, physics and electronics measurement setups
- Semiconductor, RF and power-electronics characterization
- Replacing legacy PCI / ISA GPIB boards when migrating an aging test system to ................ GPIB-USB-HS+
Bus interface ........ Hi-Speed USB 2.0 (up to 480 Mb/s)
GPIB standard ........ IEEE 488.1 / 488.2, HS488
Transfer rate ........ up to 1830 KB/s (3-wire); up to 7920 KB/s (HS488)
Instruments .......... up to 14
Power ................ USB bus powered, +5 V VBUS, 200 mA max (80 mA typical)
GPIB connector ....... IEEE 488 24-pin, M3.5 x 0.6 jackscrews
USB connector ........ Standard Type A plug, 2 m cable
Dimensions ........... 8.0 x 6.1 x 2.0 cm (3.2 x 2.4 x 0.8 in.)
Weight ............... 153 g (5.4 oz), includes USB cable weight
Operating temp ....... 0 C to 55 C
Storage temp ......... -20 C to 70 C
Humidity ............. 10% to 90% RH, noncondensing
Supported OS ......... Windows 10 / 11 (IEEE 488.2 driver v14.0 or later)
INSTALLATION & USE
1. Install the IEEE 488.2 driver (version 14.0 or later) before connecting the hardware.
2. Plug the USB Type A connector into a free Hi-Speed USB port and let the system enumerate the device.
3. Attach the 24-pin GPIB connector to your instrument or GPIB cable chain; tighten jackscrews by hand
(max 0.56 N.m).
4. Assign a unique GPIB address (0-30) to each instrument and keep bus length within IEEE 488 limits.
5. Confirm communication with the driver utility, then send SCPI / VISA commands from your test
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.