The listing is for a service to install Tim Worthington's NESRGB board (this is NOT included) into an original Nintendo front loader home console that will be sent by the buyer to me which will receive the following refurbishments/services:
**Your Nintendo must be in working condition before sending it to me.
1) Will be serviced with Tim Worthington’s NESRGB kit (this board is NOT included), using a SNES style multiout to output RGB (either TTL Csync or TTL pass-through (75 ohm terminated) Csync, as well as S-Video & Composite video.
2) Greg Collins' SNES style multi out (included) will be used as the video and audio output.
3) If NESRGB V4+ version is sent, it can be wired for wireless palette changer via controller that includes six different palettes: Digital Prime, Nestopia YUV, Sony CXA, Smooth V2, FCEUX, & Wavebeam via controller combination (see below).
4) If NESRGB V4+ version is sent, it can be wired for wireless IGR (in-game-reset) via controller combination (see below).
Console will be tested using fully shielded with either TTL or TTL pass-through (whichever you have chosen) SNES Csync scart cables with the OSSC upscaler, as well as HD Retrovision SNES component cables. SNES S-Video and composite cables will also be used if you have chosen to have them modded to the multi out.
Button Combinations:
Start+Select+Left - Decrement palette counter.
Start+Select+Right - Increment palette counter.
Start+Select+Left (hold for 2 seconds) - Disable/enable NESRGB board.
Start+Select+Right (hold for 2 seconds) - Set to palette 1.
Start+Select+A+B - In game reset.
**Be sure to open up your console and dust it out. If it’s contaminated with roaches, it will be sent back immediately.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.