TheNAD BEE series—named in honor of legendary NAD director of advanceddevelopments Björn Erik Edvardsen—features entry-to-mid-level stereo integratedamplifiers built around high value, clean power, and minimalist design.
·Unit thoroughly cleaned inside and all of the internal controlsprofessionally cleaned and properly lubricated to ensure excellent performance.
·All potentiometers and switches flushed and cleanedwith DeoxIT F5 andthen lubricated with F100L Faderlube to insure smooth, noise-free operation.
·ALL knobs cleaned with ultrasonic cleaner, then hand-polished.
·ALL electrolytic capacitors get replaced including the large(costly) filter caps! Aged electrolytic capacitors negatively impactthe quality of the sound, and are likely to fail completely. That is why I insist on replacing them ALL.I only use the highest quality capacitors (Nichicon, Panasonic, WIMA,etc.) and all are purchased through reputable well-vetted U.S. distributerssuch as Mouser, Digikey, etc. NO Cheap Chinese knock-offs!!
·The original power cord inspected and cleaned; prongs polished!
·Any missing top cabinet or bottom plate screws, replaced.
·All feet are inspected and replaced as needed.
·ALL diodes and transistors which are commonly known to beproblematic,(there are some that are known in the tech community to not age very welland fail or become noisy, distorting the sound) these get replaced withmodern equivalent spec. Fairchild / Onsemi components for unsurpassed soundquality and long-term reliability.
·ALL solder joints checked for cold joints on all of the circuitboardsunder magnification and reflowed where necessary. This includes the lampconnections which are known to crack, and other high heat areas where thesolder joints tend to fail over time if not maintained and serviced.
·AmplifierDC bias/offset voltages adjusted to factory specsper the service manual for the unit.
·All functions, inputs and outputs tested and verified to be fullyoperational, including Phono.
·After restoration the amplifier was put through a real life,5-day, burn in and usage test to confirm reliability and help guaranteeoptimal long-term, quality performance..
·NAD C 320BEE Integrated Amplifier Specifications:
·Power output: 50 watts per channel into 8Ω (stereo)
·Test Headphones
·Frequency response: 20Hz to 20kHz
·Total harmonic distortion: 0.03%
·Damping factor: 160
·Input sensitivity: 220mV (line)
·Signal to noise ratio: 106dB (line)
·Dimensions: 435 x 100 x 290mm
·Weight: 6.5kg
*Shippingto continental USA Only*
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.