Motorcycle Hellfire Devil Wing Ground Projection Shadow Lamp 12V LED Aluminum Universal Motorcycle Decoration Light Screw Fix Wired A 12V LED ground projector that throws a hellfire devil wing shape onto the pavement, built in an aluminum housing with a screw bracket for a fixed frame mount on motorcycles and electric vehicles. Two hellfire wing projector lamps with the mounting brackets on white background 12V LED Source Aluminum Housing Four Light Colors Hellfire Or Flame Wing Single Lamp Or Pair Screw Mount Bracket 1Key Reasons
2See It In Detail Single wing projector lamp shown on a dark surface Close up of the projector lens and the aluminum housing Complete lamp and mounting bracket laid out on a dark surface Orange devil wing pattern projected on the ground at night 3Key Advantages Hellfire And Flame Wing Patterns The same housing carries two different projections, a hellfire devil wing and a flame wing, so one lamp covers both of the most common motorcycle ground light looks without buying two different products. Four LED Colors Blue, red, white and yellow are all offered for the same pattern, which makes it straightforward to match an existing underglow, rim light or fairing color scheme instead of running a mismatched lamp. Left, Right And Pair Setups Each pattern is available as a single left side lamp, a single right side lamp or a matched pair, so you can light one side on a budget build or run both sides for a full front-to-rear look. Screw Mount Aluminum Build The bracket fixes to the frame with a screw and the aluminum body resists vibration, so the projected pattern stays aimed instead of swinging around under power and road buzz. Low Power 5W LED Draw A stated 5W rating and 0.18A draw keep the load light on a motorcycle electrical system, which means the lamp can run with the ignition on for a full evening ride without draining the battery. 4Full Specifications Specification Value Bulb Type LED Voltage 12 V Model RIHON-HLM-01 Lighting Type Underbody Country of Origin China Brand RIHON ELEC Item Model Number RIHON-HLM-01 Product Name Motorcycle Hellfire Wing Ground Projection Lamp Product ID RIHON-HLM-01 Special Feature Aluminum body / 12 V LED / screw bracket / shadow projection Item Package Quantity 1 Material Type Aluminum and ABS Design Style Modern Recommended Uses Motorcycle and electric vehicle decoration lighting Product Dimensions Single lamp 7 x 4 cm / pair 14 x 8 cm packed Net Weight 102 g per single lamp Country of Origin of Goods China 5Choose Your Version Blue SKU RIHON-HLM-01-BLU Blue: A blue hellfire devil wing ground projection lamp. Available as a left side single lamp, a right side single lamp or a matched pair, in both the hellfire and flame wing patterns. Red SKU RIHON-HLM-01-RED Red: A red hellfire devil wing ground projection lamp. Available as a left side single lamp, a right side single lamp or a matched pair, in both the hellfire and flame wing patterns. White SKU RIHON-HLM-01-WHT White: A white hellfire devil wing ground projection lamp. Available as a left side single lamp, a right side single lamp or a matched pair, in both the hellfire and flame wing patterns. Yellow SKU RIHON-HLM-01-YEL Yellow: A yellow hellfire devil wing ground projection lamp. Available as a left side single lamp, a right side single lamp or a matched pair, in both the hellfire and flame wing patterns. 6How to Use ①Pick Your Color And Configuration Choose the light color, then the hellfire or flame wing pattern, then whether you want a single left lamp, a single right lamp or a matched pair. The variation list shows every combination that is available. ②Choose A Mounting Point Pick a spot under the frame or beside the rear bodywork where the lens can still throw its pattern onto open ground. A clear patch of pavement in front of the bike gives the sharpest shadow. ③Fit The Screw Bracket Hold the bracket against the chosen surface, mark the screw hole and fix it down so the housing cannot rotate. A loose bracket is the usual reason a projected pattern ends up pointing at the wrong angle. ④Route The Wiring Run the lead to a suitable 12V supply on the vehicle, keeping the cable clear of the wheel, the chain, the brake line and any hot exhaust section. Secure the cable so vibration cannot pull it against a moving part. ⑤Check The Projection Power the lamp up with the bike on the center stand, aim the lens at the ground and adjust the angle until the wing shape reads cleanly in the light. 7Package Includes
8Before You Buy This is a decorative ground projection lamp for motorcycles and electric vehicles, not a headlight, not a street legal auxiliary beam and not a replacement for any original lighting. It is intended to project a hellfire devil wing or flame wing shape onto the ground for display. The lamp runs from a wired 12V supply, so it needs a connection point on the vehicle and the wiring has to be routed clear of the wheel and the exhaust. The body is aluminum with a screw mounting bracket, which is what keeps the pattern aimed once the bike is running. The color and the configuration are both chosen in the variation list: blue, red, white or yellow for the color, then a left side single lamp, a right side single lamp or a matched pair for the configuration, with the hellfire and flame wing patterns available across the range. If you ride in wet or dusty conditions, wipe the lens before you park so the projected shape stays sharp. 9Care & Handling Disconnect The Power First Switch the vehicle off and disconnect the 12V supply before you touch the lamp. Working on a lit projector is the fastest way to short a lead or damage the connector. Keep The Lens Clean Wipe the projector lens with a soft dry cloth and keep it free of road film, dust and insects. The lens is what forms the shape, so a dirty lens produces a soft blurred outline instead of a crisp wing. Check The Mount And The Wiring Have a look at the screw bracket and the cable routing every few months. Vibration on a motorcycle loosens fasteners faster than you would expect, and a bracket that has worked loose is what makes a projection point at the road instead of the ground. 10Fitment & Compatibility Made for motorcycles and electric vehicles that carry a 12V electrical system and a suitable frame or bodywork mounting point. It is a bolt-on decorative lamp and is not wired into any existing lighting circuit, so check that you have a clean 12V supply available and room to route the cable away from the wheel and the exhaust. 11FAQ Does this lamp project a devil wing pattern? Yes. The lamp is offered in a hellfire devil wing pattern and a flame wing pattern, and both throw their shape onto the ground in front of or beside the bike. Can I buy just one lamp or do I need a pair? Both are available. Each pattern comes as a single left side lamp, a single right side lamp or a matched pair, so you can light one side on a budget build or run both sides for a full look. What voltage does the projector need? It is specified for a 12V electrical system, with a stated 5W power rating and a 0.18A draw, which keeps the load light on a motorcycle system. How is it attached to the bike? The housing carries a screw mounting bracket. Fix the bracket to the frame or bodywork, then route the lead to a suitable 12V supply on the vehicle. What colors are offered? Blue, red, white and yellow, each of which is available across the full range of lamp configurations and wing patterns. Is the housing plastic or metal? The projector housing is aluminum rather than thin plastic, which helps it hold its shape and stay aimed through road vibration and engine heat. Is this a legal auxiliary light for road use? This is a decorative projection lamp for display. It is not a headlight and not a road legal auxiliary beam, so it should be used as a decorative accessory. 12Shipping & Returns Ships from Shenzhen, China Dispatch time 2 business days Shipping method SpeedPAK Expedited (international delivery) Returns accepted within 60 days Return shipping paid by Seller Blue, white, red and yellow lens colors side by side Pair version: two wing projector lamps with the wiring and the mounting screws Close up of the lamp body and the screw fixing bracket Red lens hellfire wing projector lamp Blue lens hellfire wing projector lamp White lens hellfire wing projector lamp Yellow lens hellfire wing projector lamp RIHON ELEC Every item is shipped from Shenzhen, China, with a tracking number for every order.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.