Motorcycle Fork Boot Holder – Compatible with Suzuki DRZ400
- KEEP YOUR BOOT POSITIONED — Secure your motorcycle\'s fork boot where it belongs. This holder keeps the protective boot in its intended position on the suspension fork, giving that covering a defined place to stay.
- LEFT SIDE, BOTH HALVES — This left-side fork boot holder is a complete two-piece clamp: a screw half and a nut half that bolt together around the fork tube. Hex pockets in the nut half hold the nuts. The ring\'s opening is 57 mm (2.24 in) across.
- PROTECTIVE COVERAGE COUNTS — Your motorcycle\'s fork boot shields the fork tube from dirt and debris. The holder keeps that boot positioned where the covering is meant to provide protection during use.
- FOCUSED FORK MAINTENANCE — Make boot positioning part of caring for your motorcycle\'s front suspension. Use this holder when maintaining the protective fork boot, with attention to the part that secures it.
- REPAIR WITH PURPOSE — Owners and mechanics use this holder to secure the protective fork boot during front suspension repair. WHAT\'S IN THE BOX — Only the item named in the title. No hardware is included (see the description).
Your motorcycle\'s fork boot has a job: shield the fork tube from dirt and debris. Keeping that protective covering in its intended position starts with the part that secures it. The SplashNColor left-side motorcycle fork boot holder performs that role on your front suspension.
The holder is a complete two-piece clamp, and both halves are in the box: a screw half and a nut half that close around the fork tube and bolt together at two ears. Hex pockets in the nut half hold the nuts while you tighten, and the ring\'s opening is 57 mm (2.24 in) across.
How many pieces you get: one holder is 2 pieces, a screw half and a nut half. The 2 Pack is two complete holders, 2 screw halves and 2 nut halves, 4 pieces in all.
Whether you maintain your motorcycle yourself or work on motorcycles as a mechanic, this is the holder for the boot-securing task. Use it during protective fork boot maintenance or repair to keep the left-side boot positioned for its job. Your fork boot provides the coverage; the holder keeps it in place.
HARDWARE NOT INCLUDED: Only the item named in the title is in the box. Every setup is different: depending on yours, mounting it or attaching it to an existing part may use hardware you already have, such as the original screws, or you may need to buy your own screws, bolts, tape or adhesive to suit your situation. No hardware of any kind is included with this listing.
Hardware required (not included): one M6 bolt about 20 mm long with an M6 nut, and one M5 bolt about 16 mm long with an M5 nut, for each holder.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.