|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Motion Pro Pivot Suspension Vise 08-0628
$479.99

Designed to make suspension service simple and quick. Holds shocks and forks securely while you change oil, re-valve, or change seals. - Pivoting head holds parts in any position, with mechanical stops every 45 degrees
- Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system
- Large side holds 39 mm to 69 mm diameter parts
- Small side holds 14 mm to 39 mm diameter parts
- Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a bench
- Movable fluid catch pan with mesh insert, and threaded drain bung
- Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip
- Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements
- Can be used to assist in removing compression valve assembly (use of stock front axle required)
- Holds shock firmly around shock body, shaft or shock reservoir
- Facilitates removal of piston rod and seal head
- Facilitates removal of shock reservoir caps, chamber pistons or bladder
- Holds shock to remove spherical bearings or needle bearings
- Holds shocks for removal of shock spring

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|