Mircom MIX-M500SAP Advanced Protocol Supervised Control Module
Mircom MIX-M500SAP — Advanced Protocol supervised control module that switches and supervises an externally powered notification circuit.
On command from the panel it disconnects its supervision and connects an external power supply or audio amplifier across horns, strobes, bells or speakers. Dropping the supervision is what proves the relay actually transferred, so the panel gets confirmation rather than an assumption. The external supply stays relay-isolated from the loop.
- Normal operating voltage 15 to 32 VDC; alarm current 6.5 mA with the LED on
- Average operating current 400 µA max. with a 47k EOL resistor; 485 µA with the NAC shorted
- Styles Y and Z supervision; two output pairs for fault-tolerant wiring
- External supply regulated 24 VDC, or 70.07 V RMS, 50 W for speakers
- NAC current rating 3 A on Class B, 2 A on Class A; maximum line loss 4 VDC
- 4.5 in. H × 4 in. W × 1.25 in. D; mounts to a 4 in. square box
MIX-M500RAP is the relay version, two Form-C contacts with no supervision; MIX-M500S is the older non-Advanced-Protocol supervised output module; MIX-M500SAPA is this part ULC-certified.
Brand new in original packaging. Ships same business day from Atlanta, GA when ordered by 3 PM ET. 30-day returns. 1-year warranty.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.