Mini MH-SR602 SR602 PIR Infrared Motion Sensor Detector Module

Cos-Mart

Features:

This module has high sensitivity, fast response, small static power consumption, small size, easy to install. It can be used for human body induction lamps, alarms, security, access control on-demand imaging, agriculture and forestry mining automatic equipment, etc.

Specifications:

Pyroelectric human body infrared sensor module, model: SR-602

Sensing distance: up to 5 meters; recommended 0-3.5M.

Output: high level, H=3.3V, L=0V

Power supply DC: 3.3V-15V

Quiescent current: 20uA

Key points:

1. The high level time of the output of this duct is adjustable, 2.5 seconds to 1 hour, the default setting of output time 2.5 seconds, and you can change one chip resistor if you need to change it. Please read the following form for resistance value corresponding to the typical delay time.

2. Blocking time is 2 seconds, not adjustable.

3. The factory is defined as repeatable trigger and cannot be changed.

4. The supply voltage of this module is 3.3V to 15V, and the limit voltage is 2.8V to 18V.

5. Module output timing is: output high level for 2 seconds after power-on, then go low, enter standby status. If the delay time is changed, the time when the module outputs a high level after power-on will increase accordingly, which can be understood as the startup time after entering the normal working state after the electric power will increase.

6. After installing the photosensitive element, it does not work during the day, work at night, does not contain photosensitive components, and works all day. It is considered that there is no photosensitive element installed.

7. This module is very sensitive, pay attention to the installation position, try to avoid the heat source radiation source (air outlet / direct sunlight)

8. The sensitivity of this module is adjustable, and you need to change a chip resistor. Please read the relevant table below for details.

9. When soldering with 220V ordinary soldering iron, it is necessary to unplug the power supply before welding. It is recommended to use 24V low voltage soldering iron, such as domestic white light 936.

10. If you follow the MCU and connect the lamp, please read the reference circuit diagram below.

Package included:

1pc Module

Note:

- Please allow minor errors due to manual measurement. Thanks for your understanding.

- Monitors are not calibrated same, item colour displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

1 Year Warranty




1 DAY Dispatched




Fast Delivery

Payment

Shipping

We only accept PayPal payment.

If you do not want to register a PayPal account, you can still use your credit card to go through PayPal checkout cess without any extra steps.

We offer FREE shipping service.

All items will be shipped on next day after clear payment is received, usually 1 handling day included and you should expect to receive it 8-15 working days after dispatch.

In the very unlikely event that your item is lost or damaged during post, then we are responsible and will issue either a full refund or replacement.

Returns

If you are not 100% satisfied with your purchase, you can return the duct and get a full refund or exchange the duct for another one, be it similar or not.

You can return a duct for up to 30 days from the date you purchased it.

Any duct you return must be in the same you received it and in the original packaging. Please keep the receipt.

100% Genuine




Best Pricing




Fast Shipping