Meshtastic V4 Remote LoRa Node for Solar Ready Outdoor Mesh Network Projects

Upgraded ESP32-S3 & SX1262 Core for High-Performance IoT Projects: Powered by the advanced ESP32-S3R2 and SX1262 LoRa chip, this ESP32 development board delivers robust WiFi, Bluetooth LE 5.0, and long-range LoRa communication. Ideal for Meshtastic nodes and Arduino-based wireless projects requiring reliable connectivity and real-time data transmission in smart agriculture, industrial monitoring, or remote sensing.Enhanced Power & Memory: Experience superior signal strength with up to 28dBm LoRa transmission power and ultra-low reception sensitivity (-137dBm). Equipped with 2MB PSRAM and 16MB Flash, it excels in running complex firmware, UI interfaces, and multitasking applications—perfect for ESP32 dev boards used in IoT devices, asset tracking, and home automation systems.

• Integrated High-Performance GNSS + LoRa for Precision Tracking: Now featuring the advanced L76 GNSS module with multi-system support (GPS, GLONASS, QZSS, SBAS) and EASY/AlwaysLocate technologies for ultra-fast cold start (<15 sec) and low-power operation (~2.6mA). Combined with upgraded ESP32-S3R2 and SX1262 LoRa chip, this ESP32 development board delivers reliable real-time location data for asset tracking, smart agriculture, and outdoor IoT deployments—ideal for engineers and makers building GPS-enabled wireless sensor networks.
• Enhanced Processing Power & Memory for Complex Applications: Powered by ESP32-S3 with 2MB PSRAM and 16MB Flash, it handles complex firmware, UI rendering, and multitasking effortlessly. The high LoRa transmission power (28dBm) and sensitivity (-137dBm) ensure long-range communication, while seamless integration with the L76 GNSS enables precise geolocation logging—perfect for industrial monitoring, environmental sensing, or mobile LoRaWAN nodes.
• Full Expansion & Outdoor Readiness with Solar & GNSS Support: Expand functionality easily with dedicated SH1.25-8Pin GNSS interface and SH1.25-2P solar panel input (4.4-6V). Perfect for outdoor Meshtastic GPS trackers, solar-powered sensor networks, or off-grid environmental monitoring. Combine with a 915MHz LoRa antenna for maximum coverage.
• Ultra-Low Power Design with Smart Power Management: Optimized for low-power applications, sleep mode draws less than 20μA. Battery management features support lithium battery charging, overcharge protection, and seamless switching between USB and battery/solar power. It is an ideal solution for portable or remote deployments like wireless alarms, water meter reading, or mobile LoRaWAN nodes.
• Plug-and-Play Compatibility for Rapid Prototyping: Backward compatible with ESP32 LoRa V3/V2 pinouts. Fully supports Arduino IDE, MicroPython, and ESP-IDF. Features USB Type-C with ESD protection, dual IP EX antennas (LoRa + 2.4GHz), 0.96” OLED display, and expanded headers. A top-tier development platform for IoT creators and Meshtastic users needing an all-in-one solution with built-in GPS, WiFi, Bluetooth, and LoRa connectivity.
• Note: 1.The screw securing the upper left corner of the screen is a specially customized plastic screw, distinct from the other three screws. Its purpose is to avoid interfering with the 2.4GHz radio frequency and is not defective. 2.Flash the firmware first before use, otherwise the screen will be blank. The stable version of the system does not have V4 firmware, you can use 2.7.11 or 2.7.12.

Product description ESP32 LoRa V4 Parameters Master Chip ESP32-S3R2 (32-bit lx7 dual core processor) LoRa Node Chip SX1262 Frequency 433~510MHz, 863~928MHz Max. TX Power 21±1dBm, 28±1 dBm Max. Receiving sensitivity -137dBm@SF12 BW=125KHz Wi-Fi 802.11 b/g/n, up to 150Mbps Bluetooth Bluetooth LE, Bluetooth 5, Bluetooth Mesh Hardware Resource 7*ADC1 + 2*ADC2; 7*Touch; 3*UART; 2*I2C; 2*SPI; etc. Memory 384KB ROM; 512KB SRAM; 16KB RTC SRAM; 16MB Flash, 2MB PSRAM Interface USB Type-C; SH1.25-2P lithium battery interface; SH1.25-2P solar panel interface; SH1.25-8Pin GPS interface; 2*IPEX1.0 ANT(LoRa&2.4G); 2*18*2.54 Header Pins, 2*2*2.54 Header Pins Power Supply 5V@USB/Solar, 3.3-4.4V@Battery Operating Temperature -20 ~ 70 ℃ ABout USTerms of SalesPaymentShipmentresponseABout US

Welcome to our store ! We supply many products including unmanned drone and accessories, camera & camcorder accessories and Consumer Electronics.High product quality, reasonable prices, excellent customer service and a reliable credit standing is our tenet.

Thank you for shopping at our store.

Terms of Sales

1.Our items come with our warranty.

2.Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user\'s part.

3.This product comes with 30-Day Money Back Guarantee.

4.We stand behind every product we sell. If you\'re not pleased with your purchase, we\'ll be happy to make an exchange or refund.

5.For all returned products, please contact us for the returning address.

Payment- All payments must be prepaid.

- We only accept payment via PayPal. Please kindly check if you can do the payment via PayPal before placing an order. If you do not have PayPal account.

- Payment must be received within 5 days after sales ended. Unpaid dispute will be filed to for the non payable buyers.Shipment
- We will ship all orders within 2 business day of payment.

- The shipment usually takes 2 - 6 business days (Saturday and Sunday excluded).

- If you need the item urgently, please contact us for detail before purchase.

- Local pick up is not available.response1. You will receive our positive response as soon as you pay for your item.
2. Your better comments will be an encouragement for us to offer the better quality and the better service in future.
3. If you are not satisfied with them, please contact us first via Ask a Question or via Contact Seller. Your messages will be answered within 1-2 business day. We shall try our best to solve your problem to your satisfaction.