Click on the image below to get zoomed view of the Item ⚡ IN STOCK Megger MOM3 Handheld Micro-Ohmmeter 300A Kit SPECIAL OFFER: $7,499.95
Certified Pre-Owned: The Megger MOM3 handheld micro-ohmmeter is rated up to 300 A for low-resistance measurement. Auto-range covers 0.1 µΩ to 3000 mΩ with a selectable 5–300 A test current. Battery-operated IP54 instrument with USB-C PC communication and pass/fail threshold setting.
Detailed Overview Megger MOM3 handheld micro-ohmmeter (BK-30070 R02D) with Kelvin clamp lead set
The Megger MOM3 is a battery-operated handheld micro-ohmmeter used to measure low resistance with a high-current DC test output. This unit is identified by the rear label as BK-30070 (R02D) and is supplied as a field kit with a hard carrying case, Kelvin clamp leads, a charger, and a USB cable.
MOM3 applies a selectable test current and measures resistance across a low-resistance path using separate current and sense connections. The instrument supports a selectable minimum current guarantee from 5 A to 300 A (valid at resistance ≤ 2 mΩ). The measurement range is 0 to 3000 mΩ with auto range selection, and the display resolution changes by range from 0.1 µΩ up to 1 mΩ steps depending on the resistance interval.
Measurement controls and outputs
- Selectable test current from 5 A to 300 A, with minimum current guarantee behavior specified for low-resistance loads (≤ 2 mΩ).
- Auto range measurement from 0.1 µΩ through 3000 mΩ with range-dependent resolution (0.1 µΩ to 1 mΩ).
- High-current DC output up to 300 A with maximum output voltage specified as 5 VDC.
- Pass/Fail threshold setting from 0.1 µΩ to 3000 mΩ.
- Data logging with timestamp, current, and resistance, with labeling schemes including circuit-breaker oriented labeling or running numbers.
Rugged handheld format and power
MOM3 uses an internal Li-ion battery (19.8 Wh) and is specified with IP54 encapsulation for field handling. The instrument weight is specified as 2.5 lb (instrument only). The supplied charger supports mains input across 100–240 VAC, 50/60 Hz, and charges the instrument under the specified temperature limits. For PC connectivity, the instrument supports USB-C communication.
Applications
- Low-resistance measurement on non-human electrical connections such as busbar joints, cable terminations, and bonding conductors.
- Contact and connection resistance checks on non-human components such as switchgear and disconnectors.
- Verification of low-resistance paths in industrial electrical assemblies and substation equipment.
Key Benefits
- ✓ Fully Tested & Certified
- ✓ 30-Day Risk-Free Returns
- ✓ 1-Year Full Warranty
- ✓ Professional Calibration Services
- ✓ Trade-In Program Available
- ✓ Fast & Reliable Delivery
What\'s in the Box
- 1 x Megger MOM3 BK-30070 (R02D)
- 2 x Megger GA-90004 Test Cables w/ Kelvin Clamps
- 1 x Power Cord Adapter
- 1 x USBC to USBC Cord
- 1 x Hard Transport Case
Technical Specifications SpecificationValueTest currentSelectable 5 A to 300 AMaximum outputUp to 300 A DC (R < 2 mΩ); max 5 VDC output voltageResistance measurement range0 to 3000 mΩ (auto range)Display/range behaviorRange-dependent resolution from 0.1 µΩ to 1 mΩ (by interval)Inaccuracy±0.1% of reading ±0.05% of range (per specified conditions)Pass/Fail thresholdSettable from 0.1 µΩ to 3000 mΩTest interval5 sIngress protectionIP54BatteryLi-ion, 19.8 WhTypical recharge time3 h (at 25 °C)PC communicationUSB-COperating temperature-4 °F to +122 °F (-20 °C to +50 °C) Full Warranty Protection 1 Year Comprehensive Coverage
(Including Calibration Support & Trade-In Options) 24/7 Customer Support Contact Us Toll Free: (833) 322-7865 Local: (469) 470-9378 Email:
[email protected]
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.