Subscribe to Our Newsletter
Megger MIT4812 Insulation/Continuity Tester with Storage, No:MIT481/2Ref No:1004-741Our Model No:MIT4812
Product Overview
Three-wire connection for A, B and E (Tip, Ring and Ground) test leadsGated access to 500 V operation helps prevent accidental damageDifferential measurement capability between two consecutive continuity testsSingle range, faster continuity testing from 0.01 ohm to 1 MegaohmStabilized test voltage remains within specification throughout full test rangeDisplay provides combination of analog arc and dual digital readoutOn-board memory stores up to 1000 test resultsDetects and prevents testing on live circuits above user-selectable thresholdsMeasures voltage up to 600 V TRMS AC and DCOffers rechargeable options for mains and car chargingSuitable for use on at CAT IV 600V applicationsRated to IP54Three Terminal Connection:
Three terminal measurement permits the connection of all three test leads for A, B and E (or Tip, Ring and Ground). The measurement pair is selected from the A-B-E (T-R-G) button on the front panel. Selection is confirmed in the display. No disconnection of test leads to measure individual pairs is required.
Insulation Resistance Testing:
The response-controlled insulation test voltage is now accurate to +2% -0% compared to the original +20%, providing a more accurate test voltage without the risk of over-voltage damage to circuits. A variable range allows the exact test voltage to be selected from 10 V up to 500 V.
Features Include:
Test voltages - 50 V, 100 V, 250 V, and 500 V.
Variable test voltage - Adjustable test voltage from 10 V to 500 V.
2% test voltage accuracy - The output test voltage is maintained within the tolerance or 0% +2% +2 V
PASS/FAIL indication - PASS or FAIL displayed depending on threshold voltage
Stabilized test voltage - The voltage is response controlled to ensure it remains within specification throughout the full test range
Test voltage display - The actual test voltage is displayed on the smaller digital readout, with the measurement on the larger digital display.
Test range - Insulation testing up to 100 G? @ 500 V.
Measurement range displayed - The test range is displayed during selection
Measurement voltage display - The measurement voltage is displayed during the test
Analog arc - The display also features an analog arc to replicate the response of a moving coil display.
Timed testing - Automatically test to a time limit
Silicone leads - High quality flexible silicone test leads are comfortable to use and prevent measurement errors on G? ranges above 5 G?.
Test inhibit - prevents testing if voltages in excess of 25, 30, 50, 75 or 100 V (set by the user) are detected when making insulation tests. Default is 50 V.
Insulation buzzer - The buzzer can be set to buzz if the insulation resistance is above a user adjustable limit, set in the Setup menu.
Test Lock - Holds insulation test on continuously
Continuity (Resistance) Testing:
Single resistance range - One range fully automatic from 0.01 ? to 1.0 M?.
200 mA or 20 mA - Either 200 mA or 20 mA continuity test currents are available. 20 mA test current will considerably increase battery life.
Lead null - Lead resistance compensation (NULL) operates up to 10 ?s of resistance.
Buzzer - ON/OFF selected by simple push button.
Buzzer limit - Continuity buzzer limit alarm provides adjustment of the maximum resistance the continuity buzzer sounds. This is adjustable from 1 ? to 200 ? in 12 steps.
Differential measurement - Allows the difference between two consecutive continuity tests to be measured
REN - Displays the appropriate REN value for the circuit under test.
Available on 100 V ins or continuity range
Voltage Measurement:
True RMS voltage measurement to 600 V ac or dc with resolution from 0.1 mV.
Digital voltage measurement up to 600 V ac/dc
Analog arc measurement to 600 V ac/dc
Automatic display of frequency during voltage measurement.
Input impedance is 10 M? to prevent loading the circuit and reporting low voltages.
Current Measurement:
� - 400 mA AC/DC
Included Components
- 1 - MIT481/2 Insulation and Continuity Tester (1006-752)
- 1 - Set of 1 kV Silicone Test Leads with Probes and Clips (Red, Black)
- 1 - SP5 Switched Probe (1007-757)
- 1 - Owners Information CD
- 6 - AA Alkaline Batteries (1002-753)
- 1 - Hard Carrying Case (2006-649)
Terms & Conditions
Please note estimated delivery time above. Contact us for details or if you have a delivery requirement. We ask for your patience while striving to ensure your shipment arrives quickly and accurately.
- FREE Standard Shipping on items OVER $75 and less than 30lbs to continental U.S. Add $36 for AK, HI, or PR. Please contact us for shipping rates to any overseas US territories including: Northern Mariana Islands, Guam, Puerto Rico, U.S. Virgin Islands and American Samoa.
- PO Boxes/APOs require USPS shipping and may therefore experience longer lead times
- 6.25% Sales Tax for shipping to MA
- Due to international voltage requirements, please ask us prior to purchasing to confirm your product will operate correctly in your country.
- Please contact us for shipping rates to any overseas U.S. territories.
- International customers are responsible for all shipping charges, including any duties or taxes.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.