Mebay Remote Generator ATS Controller Original ATS330 Two Source Display Plus

M Remote Generator ATS Controller Original ATS330 Two Source Display Plus

Summary

The ATS330AC is a dual power automatic switching controller for mains and standby power switching applications, allowing automatic or manual control of ATS dual power switching. It has a dot matrix high resolution LCD display which shows power status, switch status, frequency, voltage, phase sequence and other parameters; the operating modes (manual, automatic, power failure) indicate the ATS switch operating status through LED indicators.

There are Chinese/English interface options, more language can be set according to user’s request. All parameters of the controller can be adjusted via the controller panel keys or by using a PC (external RS485 expansion module) to meet the different application requirements of the user.

Main Features

Dual core 32bit high performance single chip microcomputer.

AC power supply: Voltage operating range. (AC: 100-260V)

LCD screen, Available in Chinese/English languages, user’s language set if necessary.

The voltage and frequency of the mains and standby power supply can be displayed.

Automatic/Manual mode.

Suitable for various AC systems (3 phase 4-wires,, single-phase 2-wire, and 2-phase 3-wire).

Input/output function, status can be shown directly.

Totally 4 relays output.

Totally 1 configurable switch input.

A black box function, which saves the relevant parameters of the unit when a fault alarm occurs, making it easy to find the cause of the unit\'s failure.

Acquisition and display of parameters such as voltage, frequency, etc.

Control Protection: Realize automatic ATS switching of generator sets, perfect fault display and protection functions.

Standard water-proof rubber gasket. The waterproof can reach IP65.

Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement can be more easily.

Extensible RS485 interface: The connection of the extensible RS485 allows the use of the MODBUS protocol to achieve the \"three remote\" function.

Parameters Display

S1 voltage

S1 Frequency

S1 Number of closing times

S2 Voltage

S2 Frequency

S2 Number of closing times

S1/S2 with power supply time

Switch Status

Work Mode

Real-time status

Parameters

Options

Parameters

Working voltage

AC 100V-260V(L1N1/L2N2)

Power consumption

Standby：MAX 1W

Working：MAX 2W

S1Voltage Input

3P4W 100VAC-260VAC (ph-N)

S2Voltage Input

3P4W 100VAC-260VAC (ph-N)

MAX Accumulating Time

99999.9Hours (Min Store time:6min)

ClosingS1 output

250VAC/16AMP Non-contact normally Open output

ClosingS2 output

250VAC/16AMP Non-contact normally Open output

Double split output

250VAC/3AMP Non-contact normally Open output

Remote startS2output

30VDC/1AMP Non-contact normally closeoutput

Fire input

Fire input signal earth active

Closing responseinput

TheClosingresponse signal is valid

Working condition

-25-65℃

Storage condition

-40-85℃

Protection Level

IP65：when waterproof rubber gasket is added between controller and its panel

Insulation strength

Apply AC 2.2kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within 1min.

Overall dimension

106mm*86mm*45mm

Panel cutout

78mm*66mm

Weight

0.3Kg