Mebay DC92DR replaced by DC92DR MKII Generator Controller RS485 CAN interface

M DC92DRreplaced by DC92DR MKII Generator Controller generator set RS485 CAN interface PC monitoring LCD Display Self-starting Control Board

Summary

This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting.

4.3inch colorful LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly.

There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.

Main Features

There are four Models under DC9xD series.

DC90D: used for single machine automation. Start/Stop through remote start signal.

DC92D: Based on DC90D, it adds Mains monitoring and AMF (Mains/Generator automatic switching control), especially suitable for the automation system composed by mains and genset.

DC90DR: Based on DC90D, it adds RS485 port.

DC92DR: Based on DC92D, it adds RS485 port.

32bit high performance single chip microcomputer.

4.3inch TFT colorful big screen LCD, Available in 5 languages, user’s language set if necessary.

Indicator and number display through UI surface.

Acrylic material is adapted to protect the screen.

Silicone panels;

USB Port: parameters can be set even without power through USB port to monitor in real time.

With RS485 communication port, can achieve “Three Remote” functions via MODBUS protocol.

Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;

Various kinds of parameters display.

Input/output function, status can be shown directly.

More categories of surface setting.

Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.

Three class protection countdown function, which can set the maintenance time or date.

The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.

Totally 10 relay’s output, among which 8 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 2 groups as non-contact terminals.

With 5 switches input, up to 40 functions optional;

6 sensor simulation input connectors, 6 input types is configurable and various kinds of units can be set.

Battery charging control function,which can protect the battery according to battery voltage status.

Sensor can be self-defined by front face button or PC software.

Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)

Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.

Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.

Standard water-proof rubber gasket. The waterproof can reachIP65.

Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement can be more easily.

Parameters

Options

Parameters

Working voltage

DC9V----36V Continuous

Power consumption

Standby：24V：MAX 1W

Working：24V：MAX 7W

AC Voltage Input

1P2W 30VAC-276VAC (ph-N)

2P3W 30VAC-276VAC (ph-N)

3P4W 30VAC-276VAC (ph-N)

Rotate speed sensor Frequency

200-10000Hz

MAX Accumulating Time

99999.9Hours（Min Store time:6min）

Fuel Relay Output

Max 16Amp DC+VE Supply voltage

Start Relay Output

Max 16Amp DC+VE Supply voltage

AUX.output 1

Max 16Amp Non-contact-Normal close output

AUX.output 2

Max 16Amp Non-contact Normal open output

AUX.output 3

Max 5Amp DC+VE Supply voltage

AUX.output 4

Max 5Amp DC+VE Supply voltage

AUX.output 5

Max 5Amp DC+VE Supply voltage

AUX.output 6

Max 5Amp DC+VE Supply voltage

AUX.output 7

Max 5Amp DC+VE Supply voltage

AUX.output 8

Max 5Amp DC+VE Supply voltage

Excitation output

Max 0.9AMP DC+VE supply voltage

Switch value input

Available if connecting with Battery -

Working condition

-25-65℃

Storage condition

-40-85℃

Protection Level

IP65：when waterproof rubber gasket is added between controller and its panel

Insulation strength

Apply AC1.5kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within 1min.

Overall dimension

241mm*177mm*45mm

Panel cutout

220mm*160mm

Weight

1Kg