Measurement Computing PCI-DAS6071 1.25MS/s DAQ Board
$75.00

The PCI-DAS6071 board provides:* A/D converter type: Successive approximation* Maximum sample rate: 1.25 MS/s* Resolution: 12 bits, 1-in-4096* Number of channels: 64 single ended / 32 differential, software selectable
Input ranges are software selectable as either bipolar or unipolar.* Bipolar input ranges: ±10V, ±5V, ±2.5V, ±1V, ±0.5V, ±0.25V, ±0.1V and ±0.05V.* Unipolar input ranges: 0 to 10V, 0 to 5V, 0 to 2V, 0 to 1V, 0 to 0.5V, 0 to 0.2V and 0 to 0.1V.The PCI-DAS6071 has eight lines of digital I/O, and provides two digital-to-analog outputs.
Each board has nine user-configurable trigger/clock/gate pins that are available at a 100-pin I/O connector. Six pins are configurable as inputs and three are configurable as outputs.
The PCI-DAS6071 provides triggering and synchronization capability. There are five trigger/strobes and a synchronizing clock provided on a 14-pin header. The DAQ-Sync signals use dedicated pins. Only the direction can be set.
Interrupts can be generated by up to seven ADC sources and four DAC sources.
The PCI-DAS6071 board contains an 82C54 counter chip, which consists of three 16-bit counters. Clock, gate, and output signals from two of the three counters are available on the 100-pin I/O connector. The third counter is used internally.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.