|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
McIntosh MAC-1900 Reproduction PCB Set: New, Tested. Skip the Recap
$299.00

McIntosh MAC-1900 Reproduction PCB Set: Brand New, Fully Populated, Tested & Burned In This is a complete set of new reproduction circuit boards for the McIntosh MAC-1900 receiver, hand-built, bench-tested and burned in. Skip the recap. Replace the boards. What’s included (5 boards) (Original boards in photos for comparison only, not included) - 1 × Power Regulator board
- 2 × Preamp boards (left and right)
- 2 × Power Output boards (left and right)
Every board is new and fully populated - All modern, currently produced components. No used or salvaged parts.
- Quality brands throughout, including Vishay, Nichicon and WIMA
- FR-4, ENIG, Gold 2U, upgraded 2 oz copper, plated-through-hole construction
Tested and burned in - Bring-up on a current-limited supply and dim bulb tester, with all rail voltages verified
- 24-hour burn-in under load before shipping
- Measured on an Analog Discovery 3 with Waveforms and the Audio Analyzer Suite
- Measured performance matches or beats a stock set, and it sounds as good or better in our opinion.
Fitment - Built to the latest MAC-1900 configuration (serial AN1001 and later)
- Expected to work in all chassis. Tested on S/N 4X230+ chassis.
- Early-serial (1X001-era) preamp circuit design not offered but these should work as an upgrade.
Installation notes - These are drop-in replacements for the original boards. Only install in a known good chassis.
- Standard vintage receiver safety applies: discharge the filter caps before swapping boards, and power up through a dim bulb tester the first time.
- Boards that sound great in a tired chassis are still limited by that chassis.
- Secure to chassis with the original L-brackets.
- These are new boards but there are insertion marks on the edge connector fingers from insertions for testing.
Shipping: Free

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|