Matco Tools Relay Tester
$49.23

Tests both 12V and 24V relays!3 diagnostic trouble codes help define the cause of the bad relay!Quick off-the-car relay testerChecks relay coil and switch contactsFails bad relays - Good/Bad indication, green light for PASS, red light for FAIL with flashing trouble codeThe Matco RB192 is a quick go/no-go tester for the most common automotive relays. This version tests both 12 and 24-volt relays. If the relays fail the test, 3 different trouble codes will advise you of the possible causes for the failed relay. The red LED will flash once, twice, or three times to indicate the problem. Trouble code definitions are printed on the back of the tester for your convenience.The Matco RB192 provides you with an indication of the general health and functioning of the relay switch contacts and coil. It will check the control side of the relay by applying a signal to the relay coil while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay several times during each test session as it watches for consistency in every cycle. Relay Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful during the test session.Specifications:Test 12 and 24 volt relaysSettable to 4 and 5 pin relayUses vehicle battery for power3 Diagnostic Trouble Codes - Green Light if the relay is good - Red light if the relay is badSwitch contacts are loaded to detect excessive resistance

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.