|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Mastercool 84722 72" R134a Charging Hose with Shut-Off Valve, Yellow
$35.50

Mastercool 84722 72" R134a Charging Hose with Shut-Off Valve, Yellow - The Mastercool 84722 is a 72" yellow R134a charging hose with a shut-off valve, terminating in 1/2" ACME-F fittings on both ends. It uses Grade 5 nylon barrier hose construction rated for a working pressure of 800 PSI and a burst pressure of 4,000 PSI, and meets SAE J2196 specifications with UL testing.
- Features:
- Grade 5 nylon barrier hose construction for high pressure applications.
- Knurled brass nuts allow easy finger tightening.
- Crimped with 8-segment dies for a secure fit and maximum durability.
- Meets SAE J2196 specifications and is UL tested.
- Working pressure of 800 PSI, burst pressure of 4,000 PSI.
- Suitable for A1-A2L and A3 refrigerants.
- Meets all EPA, SAE, and UL requirements for containment of refrigerant.
- Specifications:
- Manufacturer: Mastercool
- Part Number: 84722
- Product Type: R134a Charging Hose
- Length: 72"
- Color: Yellow
- Shut-Off Valve: Yes
- Fittings: 1/2" ACME-F x 1/2" ACME-F
- Hose Barrier Material: Nylon
- Working Pressure: 800 PSI
- Burst Pressure: 4,000 PSI
- Standards: SAE J2196, UL Tested
- This item is also often referred to as an R134a charging hose, yellow AC service hose, shut-off valve charging hose, 1/2 ACME charging hose, and Mastercool 84722 hose.
Mastercool manufactures air conditioning, refrigeration, and automotive service tools, including manifolds, couplers, vacuum pumps, and leak detection equipment. Q: What fittings does the Mastercool 84722 hose use? A: This hose has 1/2" ACME-F fittings on both ends. Q: Why is this hose yellow? A: Yellow indicates a center hose with a shut-off valve, used for connecting to the refrigerant source or recovery equipment. Q: What is the working pressure rating of this hose? A: This hose is rated for 800 PSI working pressure with a 4,000 PSI burst pressure. Q: What refrigerants is this hose suitable for? A: This hose is suitable for A1-A2L and A3 refrigerants.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|