Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

Marantz 2330B Complete Rebuild Kit High-Quality Receiver Recap Caps Transistors

Marantz 2330B Complete Rebuild Kit High-Quality Receiver Recap Caps Transistors
$170.00

Buy Now

Up for sale here is this rebuild kit for the Marantz 2330B. This is not for the regular 2330, that kit is here. This includes replacements for all electrolytic capacitors, as well as many transistors (outside the tuner boards), the power supply board diodes, and a new relay. It also includes upgraded replacement main capacitors and bypass capacitors for them. This does not include new lights, fuses, or output transistors. The correct replacement output transistors are four MJ21195G and four MJ21196G, available here. Please do not buy any of the Chinese transistors listed on --these are counterfeit and may damage your receiver.
This kit includes the following:
P800 Power Supply kit:
14 capacitors10 transistors5 diodes (2 dual diodes, 3 zener)
1 relay
P700 Amplifier Boards:
12 capacitors6 transistors (4 matched)8 TO-3 mica insulators1 piece of heat-shrink
P400 Phono Board:8 capacitors8 transistorsP300 Board:
15 capacitors2 transistors
P150/200 Boards:
20 capacitorsPE01/PH01/PU01 Boards:20 capacitors
11 transistors4 2SA798 replacements
Tuner Boards:
35 capacitors2 adapter plates to replace the main filter capacitors
4 6800 uf 100v caps for the board
4 bypass caps
InstructionsThese are all high-quality brand new genuine parts, the same onesI use when I rebuild Marantz equipment.The main filter capacitors are Chemi-Con 6800 uf 100v capacitors, and the other capacitors are 105° Panasonic FC, Nichicon PW, Nichicon KL, and TDK film caps at the same uf ratings and the same or higher voltage ratings. The transistors and diodes are the correct Fairchild/Onsemi and Toshiba subs for the original transistors.There are four mini adapter boards and four SMD dual transistors to replace the four 2SA798s. You will need to assemble these, so you\'ll need either a very fine-point soldering iron tip and very thin solder, or you\'ll need SMD-working equipment.Or you can skip that step.
I will include surprisingly well-written instructions, but this is extremely complicated, because there is so much packed into this receiver! These monster receivers are a lot of work! You should know what you\'re doing and have a decent soldering iron, heat-sink compound, and a dim-bulb tester with a 100W or 150W incandescent bulb. I would recommend a desoldering gun such as the Hakko FR-301.This kit has 155 parts in it, so it will take a while.Why buy this kit over the others on ?
  • Custom boards to replace the main filter caps
  • A full recap kit for the tuner boards--no skipping those!
  • The correct replacement relay
  • Replacements for most transistors. There are a lot of bad transistors on the 2330B, and they desperately need replacing. No one else is as obsessed with replacing transistors as I am, and no one else includes replacements for as many transistors. Your receiver will sound so much better!
  • Replacements for all of the power supply zener diodes and dual diodes
  • The proper low-leakage caps are included. There are loads of Nichicon KL and TDK film caps in this kit, which are necessary for a correct rebuild.
  • Custom replacements for the four 2SA798 dual transistors that go bad
  • 16 new TO-3 mica insulators are included for the output transistors
  • Surprisingly detailed and well-written instructions, plus a link to download a free service manual

US shipping and handling is $12, and international is $36. If you have any questions, please ask.
Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 30 different values, a large variety of transistors for vintage stereo repair, new 250v yellow film crossover capacitors, and more. Just use \"add to cart\" on everything you want and then check out for combined shipping.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design