Be seen when stopping on busy roads or the motorways
with some reflective and fluorescent chevron markers.
Also suitable for site vehicles and emergency vehicles.
They are made from red reflective material with yellow fluorescent / day glow
yellow stripes with a magnetic backing to stick to a smooth clean steel surface.
The stripes are 150mm wide to conform to chapter 8 regulations.
PLEASE NOTE: THIS sale IS FOR ONE SINGLE SQUARE NOT A PAIR.
They need to be used in pairs for rear warning markers (just rotate one 90 degrees to form chevrons pointing to the center on the vehicle).
The size is 600mm x 600mm but can be cut to size with scissors, so are suitable for vans or trucks.
I also do these as a self adhesive sign please check my shop.
Check out my other listings of chevrons andmagnetic signage.
Traffic Signs Manual Chapter 8 Operations; O5.2.3(c)
Chapter 8 requires high visibility rear vehicle chevron marking for vehicles stopping on
the highway for works purposes or inspections.
O5.2.3(c) states; Chevron markings comprising alternate strips of retroreflective red
material and fluorescent yellow non-retroreflective material, of not less than 150mm
width each, inclined at 45-60° to the horizontal and pointing upwards, should cover
as much of the rear-facing portion of the vehicle as possible…”
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.