MPOWER CRB7 MK3 Router Base + ETKDX Edging Trim Kit Bundle, NEW, 7 Functions

MPOWER CRB7 MK3 COMBINATION ROUTER BASE WITH EDGING AND DOWEL TRIM KITNew and unused in original packaging. Seven routing functions from one jig, plus flush trimming for edging, dowels and plugs.
The CRB7 mounts to the edge guide rod holes already on your router and turns it into a circle jig, offset base, mortise jig and clamp guide. Adding the Edging and Dowel Trim Kit gives it one more job that most routers handle badly on their own: flush trimming hardwood lipping, iron-on edge banding, dowel heads and plugs with the router sitting flat on the panel instead of balanced on a narrow edge. Both items are sold here together.
WHAT\'S INCLUDED
CRB7 MK3 Combination Router Base (CRB7/MK3/DX)- CRB7 MK3 base plate with adjustable crank plates that set rod height and spacing at the same time- Offset handle and two-part anti-tilt leg with wide foot- Two mortise posts with fixing screws- Circle cutting pivot pin with fixing screw, plus large compass pivot hub and wood screws- Two pairs of guide rods, 9/32 inch (7mm) and 5/16 inch (8mm)- Pair of 25/64 inch (10mm) compass rods- Two guide rod lock bars- Self-adhesive indexed rule in imperial and metric, and the instruction manual
CRB7 Edging and Dowel Trim Kit (ETKDX)- Riser pad with locating dowel and pad pins, which clips to the underside of the CRB7 and creates a 7mm (about 1/4 inch) platform- Bearing tracer assembly with guide bearing, post, washer and fixing screws- Instructions
WHAT IT DOES
Seven functions from the base alone:1. Offset base plate that more than doubles the contact area with the workpiece and steadies the router during edge work2. Small circle compass, roughly 1-1/2 inch up to 17-1/2 inch diameter3. Large circle compass for circles over four feet across4. Adjustable mortising, centered or off center, with micro adjustment5. Anti-tilt support for narrow edges and taller stock6. False panel rebate and groove copier for repeating a dado or groove7. Adjustable clamp guide for parallel dadoes along a panel
With the trim kit fitted: flush trim hardwood lipping, iron-on edging, dowel heads and plugs in a single pass. The riser keeps the cutter at a consistent height above the panel, and the tracer bearing rides the edge so you are not steering by eye.
WILL IT FIT YOUR ROUTERThe CRB7 fits routers that have edge guide rod holes in the base, which covers most fixed base and plunge routers. Both 7mm and 8mm rod pairs are included, so check which diameter your router takes before buying. The router, bits and clamp guide are not included in this sale.
CONDITIONBoth items are new and unused in their original packaging. Nothing has been fitted to a router or modified. This is a private sale, so no manufacturer warranty is included.
The photos show the actual items you will receive. If you have a question about fitment or contents, please send a message before buying and I\'ll answer promptly.