MERICDA 2 Pcs KBPC1510 15A 1000V Bridge Rectifier Full Wave 4-Pin
$9.29

2 pcs of KBPC1510 bridge rectifier, 15 A average forward current and 1000 V repetitive peak reverse voltage in a 4-pin KBPC package - packaged for bench and production use rather than single unit retail. Kept in one bag, all one part number and one rating, so nothing has to be sorted or matched when the pack arrives.QUANTITY: 2 pieces of KBPC1510. A single pack covers a repair, a spare and a small production run, which is usually the reason a bag of one part number is worth having on the shelf instead of ordering units one at a time as jobs come in.CONSTRUCTION: single-phase full-wave bridge in a 4-pin case with a metal base for heatsink mounting. Four diodes and all of their interconnections are already inside, so the wiring and the matching a discrete bridge would need are gone. Check the pin markings on the case before wiring - the AC pins and the positive and negative pins are not interchangeable.ELECTRICAL: 15 A average forward current and 1000 V repetitive peak reverse voltage. Those are package ratings, not targets: keep the junction cool at full current, and derate for high ambient or for a cramped enclosure. A surge or inrush event is what usually kills a rectifier, so leave headroom on the current rating rather than running the part at its limit.TYPICAL USES: power supplies, inverters, motor drives, welding equipment and battery chargers.BEFORE YOU ORDER: confirm the case and the current rating suit your circuit - 15 A at 1000 V assumes adequate heatsinking or a short duty cycle. Check polarity before soldering.PACKAGE: 2 pcs of KBPC1510 in one bag, all one part number and one rating.
2 pcs bridge rectifier rated 15 A average forward current and 1000 V repetitive peak reverse voltage.
Single-phase full-wave bridge in a 4-pin case, so four discrete diodes, their wiring and their matching collapse into one part.
Metal base for heatsink mounting - bolted down it holds 15 A comfortably, which four loose diodes on a board would not.
Low reverse leakage and low forward loss keep the case cooler than four separate diodes doing the same job.
Typical uses: power supplies, inverters, motor drives, welding equipment and battery chargers.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.