Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

MAX7219 RED dot matrix 8x8 8*8 led display module for Arduino DIY Raspberry pi

MAX7219 RED dot matrix 8x8 8*8 led display module for Arduino DIY Raspberry pi
$2.99

Buy Now

MAX7219 8x8 Dot Matrix LED Display Module 5V MCU Control 64 LED Dot Kit w/ Headers
Module is assembled, except for the 5x1 header pins which you have to solderDescription

The MAX7219 8×8 Dot Matrix Red Display Module Kit has a 1.3″ 64 LED dot matrix display with built-in MAX7219 serial LED driver.

PACKAGE INCLUDES:
  • 1.3″ 8 x 8 dot matrix of red LEDs
  • MAX7219 LED Driver board
  • 5-pin right-angle male header
  • 5-pin right-angle or straight male header
KEY FEATURES OF MAX7219 8×8 DOT MATRIX RED DISPLAY MODULE KIT:
  • Single 8×8 LED Matrix Display with 1.3″ high bright red display
  • Built-in MAX7219 LED Driver
  • SPI 3-wire serial interface for easy hookup to MCU
  • Can daisy-chain multiple modules together for larger displays
  • Kit comes with IC soldered. Just need to add connectors and plug in the display module
  • 5V Operation
MAX7219 LED Driver

The MAX7219 is a popular and flexible 7-segment, bar graph and dot matrix common cathode LED driver that supports many functions for controlling LED displays.

The driver provides flexible individual LED control as well as basic functions such as turning the display ON/OFF and adjusting the LED brightness.

The MAX7219 communicates with a MCU via a 3-wire SPI bus. Once the display is updated by the MCU, the MAX7219 then takes care of all the work of keeping the display refreshed, so it removes that overhead from the MCU which can be off doing other more important things.

SPI Interface

The module communicates via the SPI interface, so it only requires 3 data pins to connect to a MCU.

If a larger display is needed, several modules can be daisy-chained together.

Libraries are readily available such as the “LedControl.h” library built-in to the IDE for Arduino that makes communicating with the display very straightforward.

Module Connections

There is an input header on one end for connection to an MCU and output header on the other end for connecting to additional modules.

Input Connector

The header pins on the “IN” side is the main input connector. “Vcc” connects to 5V. Due to the fairly high current draw of the display (up to 250mA if the brightness is cranked all the way up), it is recommended to keep the brightness turned down to < 50% to avoid overheating the MCU voltage regulator if there are other peripherals also attached to this supply. “GND” connects to ground which needs to be common with the MCU.

The other pins are for the SPI interface. “DIN” is the Data In. “CS” is Chip Select (sometimes labeled as LOAD) and “CLKis the Clock pin. These lasts 3 pins are connected to any digital outputs on the microcontroller. Which pins they connect to is defined when an instance of the LedControl is created as shown in the program below.

1 x 5 Header

  • VCC – Connect to 5V.
  • GND – Connect to system ground. This ground needs to be in common with the MCU.
  • DIN – Connect to any digital pin on MCU.
  • CS / LOAD – Connect to any digital pin on <CU.
  • CLK – Connect to any digital pin on MCU.
Output Connector

The break-out pins on the other end of the assembly are used if it is desirable to daisy-chain multiple displays. In this case, the “DOUT” is Data Out and it connects to the next modules “DIN” Data in pin. The other pins are passed straight-thru

1 x 5 Header

  • VCC– Connect to 5V on next module if looping power through.
  • GND– Connect to GND on next module
  • DOUT– Connect to DIN on next module.
  • CS / LOAD – Connect to CS / LOAD on next module
  • CLK– Connect to CLK on next module

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design