Lumberg Automation ASB 8/LED 5/4-14/RS 120M 8-port M12 sensor/actuator distribution box with attached pigtail cable and 12-pin round plug (1 1/8\" style) for the home-run connection.
Details (from the unit label and photos)
Model: ASB 8/LED 5/4-14/RS 120M
8 top-entry M12 female ports (ports 1-8), 5/4-pin
Green power LED plus a yellow signal LED per port
12-pin home-run connector. Per the Lumberg datasheet for this family, pin 12 is (+), pin 10 is (-), pin 9 is ground, and the port signals run to pins 1-8. (mouser)
Label includes the full wiring diagram and wire-color chart
Center mounting hole plus two mounting ears
Attached cable length: approx. 10 inches
Condition
Used surplus, removed from service. Sold untested, as-is.
Normal wear: yellow housing is scuffed and discolored, with some white residue or paint on the case and near the logo.
There is chipping or damage at the cable entry at the bottom of the housing (see photos). Inspect before use.
Label is legible. Cable jacket looks intact.
Included: the box with attached cable and connector only. No mating plug, cap or hardware.
Notes: Verify the pinout against the label before connecting. Don\'t connect or disconnect under voltage.
Shipping/returns: ships in 1-2 business days.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.