Mini One Button Two Visor
This item is pre-owned – it will work like newonce programmed to your garage
One (1)
Security system garage door opener keyless entryremote fob alarm
Replacement transmitter keyfob clicker controllercontrol
wireless pager Gate or GarageDoor Opener Remote
Functions at 100% Tested & Guaranteed
MegaCode
Product Number: ACP00607
Model ACT-21A
Frequency: 318 MHz
LED Color: Red
1 Button
Factory programmed MegaCode format supports over 1,000,000 codes
1 Channel
2: type 1616 lithium batteries : (Type CR1616, CR1620,
DL1620 or equivalent)
1.25\" W x 2.25\" H x 0.48\" D
Compatible with the following systems:
Mini One Button – ACT-21
Mini Two Button – ACT-22
Visor One Button – MCT-1 or MDT-2
Visor Two Button – MCT-2 or MDT-2
One Channel Receiver – MDR
Two Channel Receiver – MDR-2
Plug in Receiver – MDR-U
Gate Receiver - MDRG
Wireless Keypad –MDTK
Designed to Use with the following Systems:
AM/II
AccessPro receivers
MegaCode code is compatible with Linear
MegaCode receivers and can be used with MDR and MDRG type garage door and gate
Receivers.
Programming Instructions:
The MegaCode radio format provides unparalleled security. The format provides more than 1 million different codes.
MegaCode transmitters and receivers do not contain a typical “coding switch”. Each
transmitter is permanently coded at the factory to a unique code. The receiver is programmed by “learning” the transmitter’s unique digital code. The receiver will activate only from these “memorized” transmitters
Block coded versions of these transmitters (ACT-21 and ACT-22) can be ordered from the factory.
Block codes are divided up as 16 facility codes, and 65,500 sequential local ID codes.
This will save time when programming and maintaining large numbers of transmitters in an application.
TO PREPARE TO USE
Program transmitter into receiver. Refer to the instructions provided
with the receiver to set it into a “learning” mode. Activate the transmitter
to program it into the receiver.
Receivers that accept “Block Coding” can be programmed to accept a
user defined block of ID codes, in addition to “learning” individual
transmitter “ID’s”.
Program Transmitter:
1. Press & release the learn button on the receiver.
2. Within 5 secs. Press and release any button on the remote you wish to program.
3. To operate the door – press the button that has been programmed.
RECEIVER MUST BE IN A \"LEARN\" MODE TO ACCEPT THE TRANSMITTER
SEND A SIGNAL TO PROGRAM THE RECEIVER BY PRESSING THE BUTTON
TO BE USED WITH THAT RECEIVER
100% Guarantee Remote Shipping / Return Policy
We ensure proper working condition of all previously usedor new remotes through a serious of tests performed with the Santronics Testingdevice. Each button is tested for functionality prior to shipment and thenlogged.
Yes. It will have a working battery installed.
Battery Condition:

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.