ratgdo Slim — Listing ratgdo Slim v1.00 — Garage Door Control Board (Without Case)
Local smart control for Chamberlain / LiftMaster openers via Home Assistant, HomeKit, or ESPHome. No cloud. No subscription.
v1.00 — ESP-07 · Internal Antenna + IPEX Upgrade Port External Antenna Not Included Advanced Users · Home Assistant Knowledge Required What It Does
Connects your garage opener to your home network for local smart control, real-time status, and automation — no cloud, no monthly fees. This v1.00 listing does not include a case.
Compatibility
- Security+ 2.0 (round yellow learn button) — fully supported.
- Not supported: jackshaft models 8500 / RJ020 and 8500C / RJ020C.
- Security+ 1.0 (purple, brown, orange, or red learn button) — experimental. May not work with all openers or wall panels.
- Chamberlain and LiftMaster openers.
- Dry contact supported in the ratgdo ecosystem — not wired by default, but the board can be modified to add dry contact support.
What Makes Slim Special
- USB-C power — use a USB-A to USB-C power cable and 5 V USB power supply.
- 3-terminal push spring connector — no screwdriver needed.
- ESP8266 ESP-07 module with built-in internal antenna.
- External antenna upgrade: available through the IPEX port with no chip modification required.
- External antenna is not included.
- Works with Home Assistant through ESPHome and can also be used with Apple HomeKit.
- Ships from the USA — no customs delays, no surprise tariff fees.
- Every board tested before shipping.
⚠ Wire before powering. Incorrect wiring can damage the board or opener.
RED → Wall control RED WHITE → Ground (GND) BLACK → Obstruction / control line Firmware & Setup
Ships pre-flashed and ready to use. Compatible with ESPHome for Home Assistant, HomeKit firmware, or Paul Wieland\'s ratgdo firmware — your choice.
ESPHome ★ Recommended
- Best for: Apple and Android users, mixed households.
- Requires: Home Assistant.
- HomeKit: Via Home Assistant HomeKit bridge.
- Diagnostics: ESPHome logs + web interface.
- OTA Updates: Supported.
Steps:
- Prepare your workspace. Ensure garage door opener power is OFF. Work in a well-lit area with easy access to the opener terminals.
- Choose firmware (optional). Ships pre-flashed with ESPHome firmware. If reflashing is needed, use the ESPHome Web Flasher before installation.
- Wire the device — do not apply power yet. Connect wires from the garage door opener to ratgdo-slim terminals per the wiring diagram above.
- Double-check wiring. Verify all connections are secure and correct. Incorrect wiring can damage equipment.
- Apply power and configure Wi-Fi.
- Connect 5V USB power via USB-A to USB-C cable.
- On your phone/tablet, join the ratgdo Wi-Fi network.
- Open a browser and go to 192.168.4.1.
- Select your home 2.4 GHz Wi-Fi network and enter the password.
- Wait 30–90 seconds for the connection to complete.
- Add to Home Assistant.
- Open the Home Assistant web interface.
- Go to Settings → Devices & Services.
- Click Add Integration and search for ESPHome.
- The ratgdo-slim device should be discovered automatically.
- Calibrate door travel. Use Home Assistant to command the door fully open, then fully closed. This teaches ratgdo-slim the travel times for accurate state reporting.
- Test functionality. Test door open/close, light control (if supported), and verify the obstruction sensor reports correctly. Assign a static IP.
HomeKit Direct
- Best for: Apple-only households, simpler setup.
- Requires: Apple Home app + HomeKit hub for remote.
- HomeKit: Native accessory, direct pairing.
- Diagnostics: Basic device web interface.
- OTA Updates: Limited.
Steps:
- Prepare your workspace. Ensure garage door opener power is OFF. Work in a well-lit area with easy access to the opener terminals.
- Flash HomeKit firmware (if not pre-installed). If your device doesn\'t have HomeKit firmware pre-installed, flash the native ratgdo firmware with HomeKit support using the ratgdo web installer.
- Wire the device — do not apply power yet. Connect wires from the garage door opener to ratgdo-slim terminals per the wiring diagram above.
- Double-check wiring. Verify all connections are secure and correct. Incorrect wiring can damage equipment.
- Apply power and configure Wi-Fi.
- Connect 5V USB power via USB-A to USB-C cable.
- On your iPhone/iPad, join the Garage-Door-XXXXX Wi-Fi network (last 5 MAC chars).
- Open Safari and go to 192.168.4.1.
- Select your home 2.4 GHz Wi-Fi network and enter the password.
- Wait 30–90 seconds for the connection to complete. If it doesn\'t connect automatically, it will prompt you to add the Wi-Fi network.
- Add to Apple Home.
- Open the Home app on your iPhone or iPad.
- Tap the + icon to add an accessory.
- Tap \"I Don\'t Have a Code or Can\'t Scan\".
- The ratgdo-slim device should appear in the list — select it and follow the prompts.
To find your HomeKit code: navigate to the ratgdo-slim\'s IP address in a browser — the pairing code is shown on that page. Assign a static IP from your router for consistent access.
- Test functionality. Test door open/close operations and light control (if your opener supports it).
What You\'ll Need
1× ratgdo PCB (this listing) · USB-A to USB-C cable · 5 V USB power supply · Wall-control wires from opener (RED / WHITE / BLACK) Comparison Matrix
Our ESP8266-based v1.00 board is shown first. Competitor references are included for feature comparison.
★ Our Product Competitors Feature v1.00 v2.51 v2.53 Ratgdo DIY ESP ChipESP8266 ESP-07ESP8266ESP8266ESP8266 Replaceable ESP ModuleYesYesYesYes Fuse ProtectionNo*YesYesNo 6V–30V ConverterNo*YesYesNo Status LEDs (Power / Data)YesYesYesNo Home Assistant Integration (GDO)Yes — through ESPHomeYesYesYes Apple HomeKit SupportYesYesYesYes Wi-Fi AntennaInternal + IPEX external upgrade port†On-boardOn-board + 2 dBi§On-board USB ConnectorUSB-CUSB-CMicro-USBMicro-USB Obstruction StatusYesYesYesNo Light Control & StatusYesYesYesYes Door Control & StatusYesYesYesYes Wireless Remote LockoutYesYesYesYes Tariffs (US & Canada)N/A — Ships from USAIncludedIncludedN/A
* 6V–30V converter and fuse protection are mainly relevant for battery-operated openers. For wall-powered setups, 5V USB-C is regulated from power adapter.
† v1.00: internal antenna is available by default. An external antenna can be connected through the IPEX port without chip modification. External antenna is not included.
§ Competitor antenna behavior varies by board design; verify the specific model before purchase.
What Is Included v1.00 — ESP-07 · Internal Antenna + IPEX Upgrade Port
- 1× ratgdo Slim PCB
- 1× ESP8266 ESP-07 / D1 Mini-style controller board with USB-C
- 1× 3-conductor wire lead
No case included. Internal antenna is available by default. External antenna can be added through the IPEX port without chip modification; external antenna is not included.
Power & Installation Items Not Included
- USB-A to USB-C cable
- 5 V USB power supply
- External IPEX antenna / pigtail
- Case or enclosure
USB-A to USB-C cable not included. ⚠ USB-C to USB-C cables do not work — use USB-A to USB-C only. Troubleshooting ESPHome
- Confirm ratgdo and Home Assistant are on the same 2.4 GHz network.
- Check ESPHome logs and HA device status for errors.
- For HomeKit pairing issues, remove and re-add the HomeKit bridge.
- If door status is wrong, recalibrate open/close travel.
- Power cycle the device for 10 seconds.
HomeKit Direct
- Confirm ratgdo and your iPhone/iPad are on the same 2.4 GHz network.
- Verify your HomeKit hub is online for remote control to work.
- If pairing fails, reset and re-add the accessory in Apple Home.
- If needed, factory reset (hold reset 10 s) and reflash.
- Power cycle the device for 10 seconds.
Shipping & Returns
- No returns for wiring errors, incompatibility, or setup issues.
Ships from the USA — no import tariffs for US buyers. Works with the open-source ratgdo ecosystem. Home Assistant and related integrations are community-driven and may change over time.
⚠ Disclaimer — Use at Your Own Risk. This product is provided as-is for DIY and home automation use. Installation, configuration, and use are solely at your own risk. We are not responsible for any damage to your garage door opener, vehicle, property, or any other equipment resulting from installation or use of this device. This product is not intended for safety-critical or security-critical applications. By purchasing and using this device, you accept full responsibility for proper installation and operation.
Take back control of your garage — ditch the myQ subscription today.
Questions before you buy? Send a message and we\'ll get back to you.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.