|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Legrand On-Q AC106A6 6-Port Cat 6a Network Interface Module Patch Panel
$15.00

Legrand On-Q 6-Port Cat 6a Network Interface Module, model AC106A6, in excellent condition. Removed from an On-Q structured media enclosure during a network upgrade. All six RJ45 jacks and 110 punch-down blocks are intact and undamaged; the blocks were previously terminated and the cables removed cleanly, so it’s ready to be re-punched. No bent pins, cracks, or missing mounting hardware. The matching patch panel for Legrand On-Q enclosures. Terminate your in-wall Cat 6a or Cat 6 drops on the rear 110 blocks, then patch to your router or switch from the front jacks. Snaps into the enclosure’s mounting grid with no modification. Highlights - 6 front RJ45 ports with rear 110 punch-down blocks
- Cat 6a rated, supports 10 Gigabit Ethernet over short runs
- Sized to mount directly in On-Q structured media enclosures (half-width module)
- Makes a clean, labeled termination point for builder-installed drops that are too short to route elsewhere
- Robust construction
- Retail is normally $65
Specs - Model: AC106A6
- Brand: Legrand On-Q
- Ports: 6
- Rating: Cat 6a
- Termination: 110 IDC punch-down, T568A/B
- Mounting: On-Q enclosure grid, module
Note: Punch-down tool and patch cables not included.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|