Leapers UTG 3-9X32 1\" BugBuster Scope, Adjustable Objective, Red Green Mil-dot, Quick Detach Rings, Screw in Sunshade, Lens CoversDetail Information:•Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof
•1 Inch Tube with Emerald Coated Lens for Crystal Clear View with Maximum Light Transmission
•Premium Zero Lockable and Zero Resettable Target Turrets with Consistent and Precise 1/4 MOA Per Click Adjustment
•Range Estimating Mil-dot Reticle <SEE BELOW>for Optimal Aiming and Shooting Performance
•Adjustable Objective from 3 Yards to Infinity to Achieve Parallax-free View
•Red/Green Dual Illumination for Versatile Applications and Weather/Light Conditions
•Large Field of View (Wide Angle) and Most Accommodating Eye Relief for Optimum Critical CQB Mission
•Complete with 2\" Sunshade, High Quality Flip-open Lens Caps and Quick-detachable RingsLeapers/UTG started introducing mil-dot reticle optics from as earlyas 2003, pioneering the Range Estimating concept as a useful tool forhunters and shooters around the world. Today, mil-dot reticle is widelyaccepted and used in this industry. Leveraging our years of experiencein this area, we developed and refined the unique Tactical RangeEstimating(TRE) mil-dot reticle and offer this feature in almost all ofour optics. With some patient learning and practice using our TRE,shooters can enhance accuracy and performance in ways not imaginedbefore.9 Dot TRE:Regular mil-dot reticles found on the market usually have 4 dots in eachdirection of the cross hair, giving you 9 different aiming points foreither windage or elevation. If you count the 2 inner tips of theopposite duplex cross hairs, you get 11 aiming points. Contrast withLeapers/UTG 36 Mil-Dot Tactical Range Estimating Reticle (TRE), whichhas 9 dots on each direction of the cross hair, giving you 19 aimingpoints or 21 including the inner tips of the duplex cross hairs.6 Dot TRE:For unique optical requirements, Leapers/UTG further created a new TREvariation. It has 6 dots on each direction of the cross hair, givingyou 13 different aiming points for either windage or elevation. If youcount the 2 inner tips of the opposite duplex cross hairs, you get 15aiming points for estimation.
- Range estimating requires common knowledge/experienceabout your target\'s actual width or height.
- Set your scope at 10X or the proper power, dependingon the scope. View the target through the scope. Place the centerof the dot against one edge of the target and measure to the oppositeedge of the target.
- Once the target has been measured in mils, dependingon the scope model, a formula is available to estimate the distanceof the target.
- Each scope will come with a pre-calculated mil-dottable of most used distance estimates to aid the user.
For example, based on past experiences, the length of a known animalfrom shoulder to tail is 40 inches (1.016 meters), and we see through ascope at, for example, 9X to find that the animal occupies 9 mils.Therefore, the distance can be derived from using the following formula -
Height or Width of Target in Meters x 1,000Magnificationx=Range in Meters (1 M = 1.0936 Yards)Height or Width of Target in Mils10Hence, (1.016 x 1,000/9) X (9/10 ) = 101.6 meters (110 yds).
Armed with this knowledge, you can compensate for the bullet’sdrop accordingly and make “great things happen”!Magnification:3 - 9XTube Diameter:1 InchObjective Diameter:32mmField of View @ 100 yards:37.7\' - 14\'Eye Relief:4.2\" - 3.2\"Exit Pupil:10.6 - 3.6 mmClick Value @100 yards:1/4\"Length:206mmWeight:13.9 ozParallax Setting:3 Yds - InfinityBatteries:CR1620 3V
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.