Latches for Kolpin ATV/UTV Black Rear Trail Storage Box (93201)
$40.00

This listing is for ONE PAIR of latches that fit theKolpin ATV/UTV Black Rear Trail Storage Box (93201). The latches are 3d printed with PLA+ filament which should provide you with years of use. The manufacturer does not sell these latches and they are not available anywhere else. Included are four 3/32\" cotter pins. The latches are pre drilled with 3/32\" holes to accommodate the cotter pins that are provided. If you have the original pins they should be reused and the holes should be enlarged to 9/64\". The original pins can be removed by prying off the cap on one end as shown in the attached pictures. If only one pin on each latch is available (most common) it should be used on the bottom, swing arm, end. A 3/32\" cotter pin can be used in the top position or you can purchase a 3mm x 30mm screw. You will have to enlarge the top hole to 1/8\" to accommodate the 3mm screw. You can use a standard drill and drill bits to enlarge the holes.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.